Curious if these rear upper control camber arms will work on my SC?
#18
Lexus Champion
iTrader: (16)
-1.5 to -2.6 in the rear, While the front went from -2 to -2.4 and so far, I'm happy with the way the car sits, since I also have adjustable toe links and traction rods in the rear.
#21
Lexus Champion
iTrader: (31)
Oh no, I perfectly know what you mean by those bushings. I had replaced every single bushing on mine including the engine and tranny mount hoping to get rid of this loud clunking sound when I shift to R or D at cold starts, and even at warm start when the car is at an angle, then it got worst when I lowered my SC, I would even hear the clunk when I'm driving whenever I'd let go of gas, and nothing solved it until I recently replaced my rear upper control arm bushings with polyurethanes... After seeing the OEM bushings out, that's when I realized how stupid of a design it was, and stupid me also cause the rear upper control arm bushings were the last thing I did due to it being very hard to deal with lacking tools... I had to do it at the military base's hobby shop for a complete access to tools...
The clunk has a lot to do with your rear diff bushings, When I put polyurethane bushings in I then had no clunk at all.
The stock bushings wear out and were way to soft to begin with so these to things contribute to the diff clunk.
#23
Driver
Thread Starter
#24
Lexus Test Driver
iTrader: (13)
old thread I know... Curious to see how they are holding up and how the heims joints are doing.. i havnt been able to drive my car with these on so just checking in to see how they are doing after some ride time on them.
Ill be swaping my set out into my DD fairly soon..
Ill be swaping my set out into my DD fairly soon..
#26
Pole Position
iTrader: (2)
Join Date: Nov 2012
Location: NorCal
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
This guy bought a SC w/ some on and he didn't have a great day
https://www.clublexus.com/forums/sus...a-failure.html
https://www.clublexus.com/forums/sus...a-failure.html
Thread
Thread Starter
Forum
Replies
Last Post
passnu2
3Gen GS460 / 450H / 430 / 350 / 300 Classifieds (06-12)
19
10-13-10 08:17 PM