Suspension and Brakes Springs, shocks, coilovers, sways, braces, brakes, etc.

Anybody tried to swap Daizens from one UCA to another

Thread Tools
 
Search this Thread
 
Old 08-28-10, 06:52 AM
  #1  
Gunnut
Intermediate
Thread Starter
 
Gunnut's Avatar
 
Join Date: Jan 2007
Location: KS
Posts: 350
Received 3 Likes on 2 Posts
Default Anybody tried to swap Daizens from one UCA to another

I replaced my UCA's the other day partly because I wanted a smoother ride and moreso because the balljoints were bad. Now I have a set of take-offs with Daizen bushings in them. Didn't know if it'd be worth it to pass these on to somebody else who would like the bushings. I would take a torch to the balljoints so nobody tried to reuse them as is.
Old 08-29-10, 07:51 PM
  #2  
tom steele
Lead Lap
 
tom steele's Avatar
 
Join Date: May 2008
Location: california
Posts: 774
Likes: 0
Received 1 Like on 1 Post
Default

the bushings slide right out wouldn't need to send the whole arm..
Old 08-30-10, 09:22 AM
  #3  
Gunnut
Intermediate
Thread Starter
 
Gunnut's Avatar
 
Join Date: Jan 2007
Location: KS
Posts: 350
Received 3 Likes on 2 Posts
Default

I guess I didn't look at them too closely. I don't have a press handy to press them out. I also have a set of caster arms with the Daizens in them as well.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BayAreaLex
GS - 2nd Gen (1998-2005)
4
09-25-12 04:08 PM
rwdanthony
Suspension and Brakes
39
08-03-10 01:13 PM
JLund
LS - 1st and 2nd Gen (1990-2000)
5
01-07-09 05:47 PM
twizted
Suspension and Brakes
18
07-24-05 12:05 PM
mikeloc24
Suspension and Brakes
10
03-04-04 04:31 PM



Quick Reply: Anybody tried to swap Daizens from one UCA to another



All times are GMT -7. The time now is 02:35 PM.