Hey guys, does anyone here know of any comapnies making a backet to support the LS430 (UCF3#) calipers for the 2GS? I know of a company making it for the rear and they are quite resonably priced. But I only know of one company making it for the front however they want over 1k just for the bracket alone which seems ridiculous. Here's some photos of the rear setup

 

ummmm...not feelin' that caliper at all.

gl with your search.

 

Thats only an example of the rear. I'm looking for a bracket to cater to the front. This is a photo of the LS430 front calipers

 

those would be sick to slap on a GS. maybe you can get a fabricator to make a template and cut it for you with aluminium. would probably be less i would think

 

The front ls430 are huge, are they aluminum? What's going to happen to the brake bias?

 

looks like is350 and 3GS calipers.

 

iNS0MNiAC, you should contact Figs (one of our CL vendors) who I believe makes a similar kit for Supra TT brakes and the 1IS to see if its something he can do.

Somebody once made these - or at least had fabricated one - and were selling gold painted LS430 brakes as "DSR" big brakes, https://www.clublexus.com/forums/sus...ig-brakes.html

 

Wow...great memory Dave...no wonder these calipers look so familiar.

 

doesnt look like they used a bracket hmm i wander thats funny i was just looking at a ls460 the same calipers thinking those look nicer than my ls400 calipers would be alot easier to polish them nice flat surfaces....so someone needs to try to fit some....

 

now i see the hole on top yea we will need a bracket time to break out the welder....

 

yea i am think figs need to hook us up with nice billet ones....

 

I think they will bolt up...the issue is the steering. The modern Gen 3 vehicles and gen 2 IS have the steering rack in front of the hub whereas the Gen2GS and Gen 1 IS have the steering behind it. The bigger brakes mean that it consumes the entire backside of the spindle area and pushes right into ths space of the steering.

If I modify my IS RCA steering knuckle to fit the Gen 2 GS, this will solve things but I have to check. Here is my steering knuckle installed.


and the new design after the first proto

 

Thanks FIGS for the input, but I think you may have misinterpreted me. If you take a look at the photo below you will notice the LS430 calipers are bolted from the bottom and not from the back as most brakes traditionaly do thus needing a bracket as shown in the first post to make it possible.

As for attempting the 3GS or 2IS unfortunately even though these also bolt from the back they are not a direct fit and would need brackets as well.

 

nice pic i also sent him a pm about this as well explaining what we want let him know it not the 2nd gen ls calipers it the 3rd gen calipers we want and it needs a bracket we will see if he comes up with something for us i have been waiting for those histreer arms for long time cant wait to get those and his rear lca are nice as well..

 

hey while your at it come up with a caster arm replacement....lol