GS300-2002

I noticed that as i drive over bumps my front suspension creaks, now it also does that when i turn the wheels while in park. I have seen the pictures of people who have lost their lower ball joint and dont want that to happen to me so i am going to replace them. My question is what are the best joints to buy, i really dont want to buy the factory ones again because as we all know they give out (in my case after 8 years/79k miles) thanks guys

GSteg

iTrader: (15)

Ball joints are maintenance parts anyways so either way you're going to have to replace it down the line. I plan on changing mine out every 80k miles. Currently I'd only trust OEM balljoints. Plus the price difference isn't that dramatic ($30-40 a pair?).

tmf2004

iTrader: (15)

Order the balljoints from Sewell lexus.. There a Vender on here.. 128.00 for a safe piece of mind..

tmf2004

iTrader: (15)

Henry you going the AIR route..

PHML

iTrader: (33)

go with OEM parts

o6spdracer

iTrader: (5)

+1 on OEM.

j stuff

iTrader: (5)

OEM for sure they arent expensive considering how important it is.

DO IT ASAP. Your symptoms are exactly what i had a couple weeks before balljoint failure on the road while driving! I was about to enter the freeway in a couple minutes too, if it happened there... dunno if id be posting right now.

lo_dit

iTrader: (8)

order OEM from Sewell. its like $115-$130 or something like that. i just changed mine recently and they weren't even bad after 120k.

for them to last another 8 years or so is definitely worth it imo

VIPFAMILY

? I just went on there before discount its like $163 after discount showing $149.00

tmf2004

iTrader: (15)

http://www.sewellpartsonline.com/par...l.asp?id=90178


128.00

w/discount 113.92

VIPFAMILY

Your awesome you just saved me like $30. Was going to buy these from TM engineering. Thanx

tmf2004

iTrader: (15)

No problem.. "When your here, your family"

spooze

iTrader: (2)

thank you for the link, what else should i order outer tie rode ends?

tmf2004

iTrader: (15)

I would since you will have the car partially apart anyway.. Also you might want to think about control arm bushings as well..

430rider

iTrader: (3)

how do I get Lower Ball Joints from Sewell for $113? thanks