"Shim Kit" Needed For TRD Brakes?

Subscribe
Jan 30, 2002 | 06:03 AM
  #1  
I dopped of my car this morning for my 50k service, and my rep asked me if I wanted to reuse the "shim kit" from the factory brakes. Apparently there is a kit with a metal sleeve or something that fits in between the pad and rotor or caliper - somehting like that....

I told him I was under the impression that a kit will not be needed since the entire brake assembly is being replaced (rotors, calipers, pads, lines).

I have sent an email to SG about it, but the 3 hour time delay is against me.

Anyone here have any knowledge? I'm searching the archives as we speak.

TIA
Reply 0
Jan 30, 2002 | 06:39 AM
  #2  
Dexter,

What kind of wheels do you have? Is this the Full TRD set with 4 piston Caliper you are installing?

What Kind of offset on the wheel do you need to have? I am looking at the market right now for a kit that the caliper will not be too a$$ big and reguires a big offset on the wheel to clear the caliper.

Thanks
Reply 0
Jan 30, 2002 | 06:43 AM
  #3  
I have factory 17s, and yes, it is the full TRD kit.
Reply 0
Jan 30, 2002 | 06:57 AM
  #4  
Dexter,

I don't know for sure but I think ANY brake "system" might need a shim kit and he might just be trying to see if you want to get a new one or use the one you have already. It might end up you don't need one at all but from what I've read most performance brakes use them. Sorry I couldn't give you a definitive answer. Do you notice you rarely see those around here.

"SG", what, Steve Ganz is some kind of icon now??
Reply 0
Jan 30, 2002 | 07:34 AM
  #5  
Dex,

When I ordered my SupraTT TRD pads. They came with the "shim" pieces. So I suppose that you'll need them to make your brake more quiet. I used them plus some suqesk sliencer(red paste from PepBoys) for my brake and they worked very well.
Reply 0
Jan 30, 2002 | 07:38 AM
  #6  
Quote:
Originally posted by JacobT
Dex,

When I ordered my SupraTT TRD pads. They came with the "shim" pieces.
Thanks Jacob. Hopefully TRD included them in this kit as well.
Reply 0
Jan 30, 2002 | 09:13 AM
  #7  
Hey guys.

Just spoke to SG (z: ) and he conveyed to me that I would not need the shim kit with the TRD Total Brake Kit.

Any additional questions, Steve is the man to reach.

Thanks for the inputs.
Reply 0
Jan 30, 2002 | 03:20 PM
  #8  
I was under the impression that trd upgrade only has rotors and pads.I inquird about calipers when I ordered my upgrade and was told by Gordon at Carson Toyota that they only had supra calipers for an upgrade.Dexter, or somebody could you clarify this for me and give me a price range for the calipers.Im kinda pissed about this. Thanks in advance.
Reply 0
Jan 30, 2002 | 04:01 PM
  #9  
Quote:
Originally posted by BadBtsz4u
I was under the impression that trd upgrade only has rotors and pads.
Thats right - no worries

https://www.clublexus.com/forums/sho...threadid=33634
Reply 0
Subscribe