FYI-Brake pads
Thread Starter
Driver School Candidate
Joined: Dec 2001
Posts: 12
Likes: 0
FYI-Brake pads
For those interested in front pads, I have run the following pads and have received the results below, hope this helps anyone looking for pads: GS400 stock brake setup
Wagner, poor braking,squeels
TRD, great braking,lots of dust, eats rotors and pads(dust comes from somewhere)
Raybestos PGD-squeels ALOT,poor braking.
My favorite so far,
Bendix Import Quiet-great stopping power,no dust,no squeel,carbon metallic strips for good breaking in.
MKD619IQ, cost me around 50.00 which is half of the TRD pads.
Brakes just like the TRD pads yet with no squeel and no dust, plus my rotors are still in great shape.
Very very comparable to the Axxis Metalmasters that I ran on my M3 and Porsches at the track.
Wagner, poor braking,squeels
TRD, great braking,lots of dust, eats rotors and pads(dust comes from somewhere)
Raybestos PGD-squeels ALOT,poor braking.
My favorite so far,
Bendix Import Quiet-great stopping power,no dust,no squeel,carbon metallic strips for good breaking in.
MKD619IQ, cost me around 50.00 which is half of the TRD pads.
Brakes just like the TRD pads yet with no squeel and no dust, plus my rotors are still in great shape.
Very very comparable to the Axxis Metalmasters that I ran on my M3 and Porsches at the track.
Thread Starter
Driver School Candidate
Joined: Dec 2001
Posts: 12
Likes: 0
Thread
Thread Starter
Forum
Replies
Last Post
Mario411
Suspension and Brakes
14
Aug 21, 2001 11:37 AM
