What did you do to your GS today?
#1801
car is beautiful but I have to agree that grille is aweful, makes the car look some what cartoon-ish / animated now. doesn't flow well. sorry man keeping it real and honest! the oe grille looks cleaner.
#1802
Pole Position
#1806
in order to achieve certain finishes you have to do some work. the gold powder wouldn't POP if the calipers weren't polished
pics are just for reference of finish
#1807
Lead Lap
iTrader: (3)
$75 per , it includes reassembly and mounting. You have to buy rebuild kits as well , they're cheap. @SoCal / @Bilgen, certain powders are transparent, so however the finish is , is how it will look.
in order to achieve certain finishes you have to do some work. the gold powder wouldn't POP if the calipers weren't polished
pics are just for reference of finish
$75 per , it includes reassembly and mounting. You have to buy rebuild kits as well , they're cheap. @SoCal / @Bilgen, certain powders are transparent, so however the finish is , is how it will look.
in order to achieve certain finishes you have to do some work. the gold powder wouldn't POP if the calipers weren't polished
pics are just for reference of finish
#1810
Lead Lap
iTrader: (3)
Scored a full sized spare. Dismounted the big ole suv tire from it, cleaned it up some and test fitted it in the trunk. Going to have to go custom cutout on the lid and floor mat wheel is 18x10 should be cool though, something different. Need to have it split and refinished like the other 4 in brushed faces and polished lips.
The following users liked this post:
tiguy99 (01-23-17)
The following users liked this post:
nelson09 (01-25-17)
#1812
Rare SheepDog Bov, Cxracing Dp Megan mp
That was Easy
Finish it off with this .
wrapped half my intake , then double wrapped Intercooler hot / cold sides, downpipe and midpipe with die titanium wrap. Next is to coat pipes witfh dei silicone coating blocking all moisture n water eternally. Regains lost hp, keeps heat in , quicker spool times , Exhuast velocity up , engine head / under hood temps low , cabin temp low
Last edited by LexLova; 01-24-17 at 08:44 PM.
#1813
Lead Lap
iTrader: (3)
Dropped off my full sized spare to have the center bore opened up to fit my adapters, split, faces brushed and cleared and the lips polished out and while I was there they told me that my center caps were all finished up. Went with the same scheme on those as the wheels. Brushed inners polished lip except had the entire cap cleared.
#1815
Rare SheepDog Bov, Cxracing Dp Megan mp
That was Easy
Finish it off with this .
wrapped half my intake , then double wrapped Intercooler hot / cold sides, downpipe and midpipe with die titanium wrap. Next is to coat pipes witfh dei silicone coating blocking all moisture n water eternally. Regains lost hp, keeps heat in , quicker spool times , Exhuast velocity up , engine head / under hood temps low , cabin temp low.
After 10 coats of Dei silicone coating
Hopefully water /Moisture can't get thru