Pick you need to take out your center vents (for Nav Hack/VAIS install)
Thread Starter
Driver
Joined: Jun 2006
Posts: 142
Likes: 0
From: CA
Pick you need to take out your center vents (for Nav Hack/VAIS install)
Here's a "90-degree" pick similar to the one I used for my mods...Just an FYI, in case you need a tool for pulling out your center vents easily. This makes it really easy. Remember to tape up the tip with electrical tape so as not to scratch anything.
The link does not work so do a search at http://www.homedepot.com for the following:
HUSKY
Cotter Pin Extractor (<---just search on these words and it will show up)
Model 74368
The link does not work so do a search at http://www.homedepot.com for the following:
HUSKY
Cotter Pin Extractor (<---just search on these words and it will show up)
Model 74368
Last edited by SuperLexy; Jul 6, 2006 at 03:05 PM.
Thread Starter
Driver
Joined: Jun 2006
Posts: 142
Likes: 0
From: CA
Originally Posted by jewel
where do you hook that to? The side or the tops of the vents? All the way back by the ducts?
I suppose you can pull in all 4 vent clip areas...just using the two outer ones worked for me, though...
Last edited by SuperLexy; Jul 6, 2006 at 03:32 PM.
Lexus Champion
Joined: Aug 2005
Posts: 2,726
Likes: 1
From: Overland Park, KS
Thread
Thread Starter
Forum
Replies
Last Post
