hi guys
I'm trying to find this part (see picture) online but every time try to search for it
the parts search says it's for another Lexus! (Is or gs) are these parts interchangeable?

thanks in advance

 

eBay...
https://www.ebay.com/sch/i.html?_fro...l+arm&_sacat=0

 

I saw that item on eBay ....
but are these parts interchangeable?

 

I'm not sure, but another member in an old post stated that the Sc shares alot of suspension parts with the Gs. I actually purchased rear shocks listed for a Gs, to put on my Sc a few years ago

 

According to eBay they are

 

Lex, I gave you the eBay part with the same number you show in that picture. It works for the SC430. I have no idea if it works on a GS.

you need to go to a dealer website and look up the lower control arm 2 for a GS to see if the part numbers are different or you should call a dealer parts dept to ask that question.

it could be physically the same part but probably has a different part number.

 

If you are looking for the LCA#2 for an SC430, the Lexus part numbers are :
48660-24020 for the right side and
48670-24020 for the left side ( driver side )
I just changed them on my 2004 SC430 and those are the part numbers I used. Fit like a glove, exact replacement part. Here is a link to the Lexus listing :
https://www.mylparts.com/oem-parts/l...Y4LWdhcw%3D%3D
According to that listing, they also fit GS300/400/430 and IS300.

 

Ok !!!! Thanks to everyone who responded....
does anyone sell a bushing that can be pressed into the original part?

 

yep, that's what I did...it's in the thread

 

Bgw I tried all the links in this tread and couldn't find the information on the bushings you used
could you post the bushings please

i was told that there wasn't a bushing made to replace the worn out one

thanks in advance

 

Daizen polyurethane or look on Rockauto.

i used Daizen.

 

Bgw I looked on rock auto found nothing put arms,no bushings!<br />do you have a part number on the ones you purchased?<br /> <br />any input would be greatly appreciated <br /><br />thanks in advance <br /><br />whodat!!!!!!!

 

Here is a link to the Daizen bushing kit for the SC430 :
https://tmengineering.net/webstore/i...e5beecae9effd6

You might need a press to install the new bushings.

 

concur, a press is a must!

 

Thanks guys I really hope this solves my problems
my mechanic has a press to install them I was told that no bushing where mad to replace
the one in lca#2 so now I can prove them wrong

thanks in advance