Bluetooth
Intermediate
Joined: Apr 2005
Posts: 357
Likes: 0
From: Hawaii
All the SC430s in Hawaii dont come with the navigation screen. There is a wooden pannel in its place with the words SC430 in small. They say there is no use for the system here in Hawaii. I guess those are the homelink buttons. 
Originally Posted by KevsSC
All the SC430s in Hawaii dont come with the navigation screen. There is a wooden pannel in its place with the words SC430 in small. They say there is no use for the system here in Hawaii. I guess those are the homelink buttons.
Lexus Test Driver
Joined: Dec 2005
Posts: 808
Likes: 9
From: Fl
Originally Posted by KevsSC
All the SC430s in Hawaii dont come with the navigation screen. There is a wooden pannel in its place with the words SC430 in small. They say there is no use for the system here in Hawaii. I guess those are the homelink buttons.
Driver School Candidate
Joined: Mar 2005
Posts: 5
Likes: 0
From: tx
Originally Posted by GEE-BEE
My Palm Treo 650 Works Awesome....
( Sprint Phone )
( Sprint Phone )
what year and model lexus do you have?
can you transfer phone book entries to the car?
any details would be appreciated.
maniaclx47
Originally Posted by maniaclx47
hello. gee bee
what year and model lexus do you have?
can you transfer phone book entries to the car?
any details would be appreciated.
maniaclx47
what year and model lexus do you have?
can you transfer phone book entries to the car?
any details would be appreciated.
maniaclx47
Driver School Candidate
Joined: Mar 2005
Posts: 5
Likes: 0
From: tx
Originally Posted by mightyd
Has anyone figured out how to increase the volume of the call for the person on the other end? I keep getting complaints that they can barely hear me.
It works for my 2005 lx470
Steps……..
1. Select Display from the NAV keys
2. From this touch-screen screen, do the following…
a. Touch in the blank space just below the word “DISPLAY” (on the touch-screen)
b. Then touch in the blank space just above the contrast “minus“ symbol (on the touch-screen)
c. And REPEAT those two touches 4 times, or until the NAV screen display changes.
3. WAIT for a few seconds until the system runs check test and the “OK” lights come on.
4. Touch “menu” at the top.
5. Touch the “BT voice quality set” button.
6. Touch “set”. This will reset the level values.
7. Raise or lower each setting using the arrows.
8. When you have them set like you want them, touch “MENU” to save the settings.
9. Now, just to be sure that the settings were saved, Touch the “BT voice quality set” button again.
If they are saved, just hit “menu” again.
10. To EXIT these menu’s, PRESS AND HOLD the NAV “display” button (step #1 above)until the
screen goes off.
My settings for my phone work best at -1 and -2.
Fyi, changing the “voice quality” box to different numbers 0-4 does nothing as far as I can tell, at least with my phone.
Thread
Thread Starter
Forum
Replies
Last Post
daned
Lexus Audio, Video, Security & Electronics
1
Feb 26, 2007 09:31 AM
Mickeyc001
IS - 2nd Gen (2006-2013)
14
Jan 1, 2006 07:24 PM
