wire harness issue
Thread Starter
Driver
Joined: Aug 2012
Posts: 171
Likes: 0
From: VA
wire harness issue
I need some help with my harness i noticed when i pulled my harness from the firewall there was a pink wire dangling and i need to know if its supposed to be in the connector or what, someone put in a greddy speed cut limiter and did a horrible job at it and i think its just the other part of the pink wire and they just didnt cap it off. How can i clean up and wrap the harness so it not so exposed?
Unless there's another pink wire in the bundle, I would say with 100% certainty that your guess is right. The length of the two ends of the pink wire look perfect to meet up at the cut point. It's weird that they stripped the end of the wire that wasn't being re-used, though. That makes me think it was connected to something else and came loose, like maybe the yellow wire with electrical tape barely wrapped?
Thread Starter
Driver
Joined: Aug 2012
Posts: 171
Likes: 0
From: VA
Unless there's another pink wire in the bundle, I would say with 100% certainty that your guess is right. The length of the two ends of the pink wire look perfect to meet up at the cut point. It's weird that they stripped the end of the wire that wasn't being re-used, though. That makes me think it was connected to something else and came loose, like maybe the yellow wire with electrical tape barely wrapped?
Yea this was very poorly done, the yellow wire has just tape no cap or anything and the pink wire is just a little longer which also lead me to think it was supposed to be in the plug connector but there is no end to the pink one connected to the greddy scl
Thread
Thread Starter
Forum
Replies
Last Post
