Sc drift build
How much? Those are the ones I was going to get from driftmotion. Ya my last tube front on my 240 I left them open and I got so much crap in my engine bay, and in oregon it tends to rain and I don't want my filter getting wet.
Ok I wasn't planning on ordering them for a weeks but ill let you know and see if you still have them. I also have a parts car that might have something you need. I think I'm going to make my own knuckles the sc's are actually pretty easy looking compared to a s13. My friend zack abracrombie makes awesome angle kits he made 73 degrees and the FC rx7. Close to to 70 in the 240. He is going sometime soon start making a kit for the sc if he can get cought up on orders. Which ill post all te info when that kits done. But for know I'm going going to mess around with my extra knuckles I have
The ecu I got lol. Whoever extended this harness left it about 3 inches short when they did it so the harness barely reaches down past the heater box. I'm going to have to extend it again
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
Lexus NX 350h: A Fuel-Sipping Secret Hot Hatch???
Michael S. Palmer
5 Best & 5 Worst Lexus Daily Drivers
Joe Kucinski
Top 5 Hottest Lexus & Toyotas in 2026 (Hardest To Buy)
Brett Foote
2026 Lexus IS 350 F Sport Review: The Last of Its Kind Still Rocks
Michael S. Palmer
Top 10 Most Confusing Things Lexus Has Ever Done!
Joe Kucinski
2026 Lexus ES Review: Lexus Re-Embraces Founding Principles
Michael S. Palmer
10 Lexus Bargains That are Cheaper Than a New Toyota RAV4
Joe Kucinski
8 Weirdest Things Lexus Has Ever Built
Verdad Gallardo
10 Lexus Designs That Have Aged Like Fine Wine
Verdad Gallardo
Ok I wasn't planning on ordering them for a weeks but ill let you know and see if you still have them. I also have a parts car that might have something you need. I think I'm going to make my own knuckles the sc's are actually pretty easy looking compared to a s13. My friend zack abracrombie makes awesome angle kits he made 73 degrees and the FC rx7. Close to to 70 in the 240. He is going sometime soon start making a kit for the sc if he can get cought up on orders. Which ill post all te info when that kits done. But for know I'm going going to mess around with my extra knuckles I have
I have a question if someone can help I have this 2 wire plug coming off the harness that comes out of the timing cover right where the o2 wires come out, and the plug has been lengthened by about 5ft and im not sure where it goes.
