AnonymousG Pic/Progress Thread
Driver School Candidate
Joined: Nov 2012
Posts: 28
Likes: 0
From: new york
Suspension
I know your super happy now with those suspension upgrades I was looking to use FIGs subframe and diff bushing kit . May replace upper control arm bushings with figs poly set . And do the rears figs also
Driver School Candidate
Joined: Sep 2014
Posts: 3
Likes: 0
From: nevada
Clean
Now for the recent update.
Recent installed
black S2000 front seats
better condition grey rear seats
Window visors
Roof spoiler
Battle Version Modded Knuckles
Rear subframe with Battler Version bushings
Supra Swaybars
Battle Version Front swaybar endlinks
Newer rear hubs
Supra FUCA with poly bushings
FLCA with Poly bushings
All arms in rear have poly bushing
Poly bushing for the rear diff
Used Steering rack w/ flipped OEM tie rod ends
Braided power steering line
Newish exhaust 3" titanium midpipe with vband to round magnaflow to a y.
New steering angle! All i need now is new tie rod ends, I want BV and some spacers.
Raised it up a bit, mianly due to newish exhaust and old ride high i had an inch of clearance.
Then got bored and did this the other night. And now your up to date on how my car is!
The car rides 100000000x better with poly bushings in all the arms. Just need to get my right rear toe situated, due to alignment places saying it is maxed out..?
Recent installed
black S2000 front seats
better condition grey rear seats
Window visors
Roof spoiler
Battle Version Modded Knuckles
Rear subframe with Battler Version bushings
Supra Swaybars
Battle Version Front swaybar endlinks
Newer rear hubs
Supra FUCA with poly bushings
FLCA with Poly bushings
All arms in rear have poly bushing
Poly bushing for the rear diff
Used Steering rack w/ flipped OEM tie rod ends
Braided power steering line
Newish exhaust 3" titanium midpipe with vband to round magnaflow to a y.
New steering angle! All i need now is new tie rod ends, I want BV and some spacers.
Raised it up a bit, mianly due to newish exhaust and old ride high i had an inch of clearance.
Then got bored and did this the other night. And now your up to date on how my car is!
The car rides 100000000x better with poly bushings in all the arms. Just need to get my right rear toe situated, due to alignment places saying it is maxed out..?
Driver School Candidate
Joined: Sep 2014
Posts: 3
Likes: 0
From: nevada
Did you not like the n1 style mufflers? I was planning on getting those with cat delete.. also my hood struts went out so I got new ones after taking the old ones out and realizing how flippin heavy that hood is I dont even want to put the new ones on until I get a firberglass or carbon fiber hood.. im hella mad you found one off craigslist I dont have much to work with on cl here in vegas
Thread
Thread Starter
Forum
Replies
Last Post
Shawn808
SC430 - 2nd Gen (2001-2010)
2
Jun 21, 2010 03:30 PM
