Notices
SC - 1st Gen (1992-2000)

1997 SC400 a/c Problem

Thread Tools
 
Search this Thread
 
Old Jul 1, 2012 | 06:33 PM
  #1  
stratman3's Avatar
stratman3
Thread Starter
Driver
 
Joined: Nov 2011
Posts: 123
Likes: 0
From: Florida
Default 1997 SC400 a/c Problem

Today I notice my a/c is not getting as cold. I was gonna try to refill after having a hard time finding the low side, I noticed the gage on my line was reading full so I did not add any. What should the pressure be on my sc? And also the dryer eye glass was not clear if that matters. The compressor is running fine and it's not cycling.
Reply
Old Jul 1, 2012 | 08:02 PM
  #2  
Piratse's Avatar
Piratse
Rookie
iTrader: (1)
 
Joined: Jun 2012
Posts: 80
Likes: 0
From: TX
Default

You may have already checked this but is it hot air? If so it could be "door" not moving to allow the cold side through. Could also be heater valve control switch maybe?
Reply
Old Jul 2, 2012 | 08:19 AM
  #3  
SC400slide's Avatar
SC400slide
In Recovery Mode
CL Folding 25,000
iTrader: (11)
 
Joined: Apr 2012
Posts: 3,871
Likes: 36
From: NM
Default

I've heard those gauges aren't reliable.
You might need a new cooler.
Reply
Old Jul 3, 2012 | 01:55 PM
  #4  
stratman3's Avatar
stratman3
Thread Starter
Driver
 
Joined: Nov 2011
Posts: 123
Likes: 0
From: Florida
Default 1997 SC400 a/c Problem

[/B]
Originally Posted by Piratse
You may have already checked this but is it hot air? If so it could be "door" not moving to allow the cold side through. Could also be heater valve control switch maybe?

I think you're right. The a/c worked perfect today no issues at all. I will check into that door.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MattStarr
SC - 1st Gen (1992-2000)
13
Feb 23, 2013 03:09 PM
ReeM
GS - 1st Gen (1993-1997)
2
Oct 19, 2011 05:43 PM
kenmonster
Maintenance
16
Dec 23, 2008 06:22 PM
nsx01
SC - 1st Gen (1992-2000)
8
Dec 4, 2003 01:05 AM
LEXBOGGY
SC - 1st Gen (1992-2000)
11
Sep 7, 2001 05:48 PM




All times are GMT -7. The time now is 07:37 PM.