hey guys-

have some mystery non-standard 2jz-GE camshafts, trying to ID.

Any Help would be much appreciated-cams were paired in built motor with crower titanium retainers, steel springs, Steel multi-angle valves with stock buckets, stock shims, and lash caps under the buckets on top of the valve stem.

Help ID-ing would be great, they look like stock re-grind, I would guess 268/272?? the base circle seems reduced versus stock 2jz-ge. Number 1 and number 2 are differently ground.





























camshaft 2:



camshaft 1:

 

Are you sure that they're 2JZGE cams? It could be the pics but I didn't see the Distributor drive on the Exhaust cam so most likely if there's no drive on the cam then the cams are for the 2JZGTE..

 

Yes, they are ge cams with dizzy drive.

they were setup in a built motor with lash caps under buckets (I don't think that is standard Toyota)

Engine was a obd1 non vvti 2jz-ge with dizzy

 

crower regrinds some came at 264 and 272

 

cool thanks! Any one know of a reference way to tell these by caliper? I do not have a cam degree profile setup avail to me