2jzgte single turbo conversion choice help :)
03-30-11, 10:40 PM
#1
2jzgte single turbo conversion choice help :)
Ok guys so I'm gonna do thing single turbo swap and right now I'm looking at what turbo I wanna buy b4 the end of the week. I'm going to be looking for around 450 low boost and about 650 high boost. I know there is no such thing as a free lunch but, I want something with not a shat ton of lag. I will being doing 1/4 mile drag with this car and it can get tempting to get more power so a little bit higher power may be needed from the turbo later on.
Also its a bit off subject but what horsepower is the r154 good for normally.
Thanks everybody for ur responses. I looked for a thread like this but couldn't find one. So I did use the search button
lol
Also its a bit off subject but what horsepower is the r154 good for normally.
Thanks everybody for ur responses. I looked for a thread like this but couldn't find one. So I did use the search button
lol
03-30-11, 11:39 PM
#4
Driver
iTrader: (1)
Join Date: Jun 2010
Location: IL
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
TO me the only choices are the PTE 62 series, Borg Warner S200 and S300 extended tip series as well as Holsets : HX35 / 40 .
Everything else is old technology or way overpriced.
Everything else is old technology or way overpriced.
03-31-11, 03:30 AM
#6
be very careful with the r154 .. at 600 rwhp im on my 2nd one already and i dont drag car at all...
pte 6265 dbb with a .81 hotside will reach those goals easily with headroom to 700 rwhp.. ex manny design and if you are cammed or not will also contribute to the equation
pte 6265 dbb with a .81 hotside will reach those goals easily with headroom to 700 rwhp.. ex manny design and if you are cammed or not will also contribute to the equation
Trending Topics
03-31-11, 09:55 AM
#8
Lead Lap
iTrader: (7)
Join Date: Jul 2009
Location: CA
Posts: 690
Likes: 0
Received 0 Likes
on
0 Posts
Billet 6265, Undivided Cast manifold, Quick Spool Valve. You are welcome.
http://www.youtube.com/watch?v=MBi7F91JClI
http://www.youtube.com/watch?v=MBi7F91JClI
03-31-11, 12:08 PM
#9
pte 6265 dbb with a .81 hotside will reach those goals easily with headroom to 700 rwhp.. ex manny design and if you are cammed or not will also contribute to the equation[/QUOTE]
that is one i have been considering i just don't know weather to go pte or BW
03-31-11, 02:21 PM
#11
Japanese Tuning in Plain English
The HKS T04R/T04RZ is THE best single turbo for the 2JZ-GTE. Compare this graph to others and you won't find a single turbo that produces this much torque so early and as linear... notice the torque doesn't drop off so quickly like other turbos do.
The T-78 is an old design but it's inexpensive and comparably sized to the T04R. It would be a good option for cost reasons.
[IMG]
[/IMG]
Choritsu-shi
The T-78 is an old design but it's inexpensive and comparably sized to the T04R. It would be a good option for cost reasons.
[IMG]
[/IMG] Choritsu-shi
03-31-11, 03:55 PM
#14
The HKS T04R/T04RZ is THE best single turbo for the 2JZ-GTE. Compare this graph to others and you won't find a single turbo that produces this much torque so early and as linear... notice the torque doesn't drop off so quickly like other turbos do.
The T-78 is an old design but it's inexpensive and comparably sized to the T04R. It would be a good option for cost reasons.
[IMG][/IMG]
Choritsu-shi
The T-78 is an old design but it's inexpensive and comparably sized to the T04R. It would be a good option for cost reasons.
[IMG]
[/IMG] Choritsu-shi
Sorry got you beat I have a customer with a setup making 600 whp at 3000 rpm... though in a way we cheated to get this kind of performance out of a single turbo.... if you consider cheating having the hks 3.4 stroker kit on a smaller single turbo.
My recommendation for the op would be a 67mm with a .68 ar housing and a aem ems with upgraded fuel system