Want to know if 18x9" rims for front +44 offset and 18x10" rims for rears -8 offset will they fit right or need spacer ?

 

You'll have huge problems with -8 in the rear, that will be almost two inches outside the body.

 

Fronts will be sunken and rears will be crazy flush.

 

You think they will work good with Np ?

 

that would be a strange looking stance

 

You'll have some issues with the rears, some work will have to be done. I'd suspect some pull, depending on tire choice. Your rear will stick out roughly an inch more than the 18 x 10.5 et 25 in the attached image, with respect to the same height of course.

 

How did you end up with such horrid offset sizes?

 

terrible sets of offset. +44!? thats beyond stock offset and to top it off with -8. Do you have any other choices besides those offsets?

 

just been looking around for some rims not many used stagger rim for sale around here unless i go with 19" or 20" and don't want 19" or 20" and not looking to spend alot of $$$ doing an engine swap so not alot cash to go on rims

 

whats the offset on the front?

 

^, Effective offset was a 29, the wheel being a 37 plus an 8mm spacer.