i have tried to "search" but nothing seemed to help, im sure everyone here knows a little something about 240sx's. i seen some s14's/13's with 2jz's anyone know how hard it is to do a 2jz swap in one and if you will need anything extra. might start a little project.

 

help help.

 

Tech2, www.2jzswap.com

They offer detailed videos and even offer their own crossmembers and parts for a direct bolt in for certain applications.

 

i have a 2jz from my totaled sc300. helpss

 

This is a SC300 forum, not a 240sx forum...

 

it was a question moron.

 

tech 2 mentioned above is your best bet. They have a forum as well.

 

not that bad but takes about 8-11k to do the swap with no ebay parts. friend it just finishing one up... i believe a ls1 is actually cheaper than a 2j

 

why do these people have to come in from other forums and be ****** about everything? good luck finding help with that s***

 

There is no reason for a rookie like yourself come in and calling someone a moron when someone is trying to point you in a right direction.
With that's a ****ed up attitude search the thread called
https://www.clublexus.com/forums/sc-...-sc-forum.html

 

aaaaaannnyyyway...
there is a 240 cross member for a 2jz swap in the sc300/400 classifieds.
would need the ecu/harness and trans/trans cross member to do it.
oh, and custom drive shaft.

 

you can check out WWW.MYJZSWAP.COM They have the swap kits and wireing. Basicaly a one stop swap shop. I highly recomend them. Great people and some of the Best Prices.

 

not going to find alot on these forms about the 240.. i suggest u to check out what people recommend you.