I recently bought my '92 SC300, and have been working on fixing this and that so that I can take it in for inspection. In MD you have to have a working horn to pass inspection, and as I was checking various things out in the car today I found that the horn does not work.

I pulled the airbag off of the steering wheel and on the left side of the steering wheel there is a two wire connector that isn't connected to anything. Should there be something here? I feel like the horn switch would go there but I can't find any pictures or wiring diagrams to tell me.

If someone could post a picture of the inside of their steering wheel or a wiring diagram or something that will tell me what is supposed to go there (if anything) I would really appreciate it.

[IMG][/IMG]

fuse#23 in the engine bay is for your hazard and horn.hay is your crusie control out too?if so then were in the same boat.

oh the wire on the left side is for my OG phone.*PIMP*

Thanks a lot for the picture and info! That eliminates one possible problem. My fuse isn't blown, so it could either be the clock spring (I hope not) or just the horn relay. I'll just throw a new relay in and hope for the best.

well i think someone is sellin a clockspring in the classifieds for 50 bucks if you want to try.