What else to replace when doing springs / shocks /struts?
I'm looking at replacing my springs / shocks / struts, and since i'm down there, is there anything i should replace suspension wise, that maybe worn out.
Please provide links on where to buy and what i should replace
thanks
Please provide links on where to buy and what i should replace
thanks
How many miles do you have on your car? The front lower control arm bushings are notorious for wearing out and seriously degrading ride quality. The rear CA bushings wear too, as well as the front upper CA bushings, but they seem to take substantially longer to get to the condition of the lower fronts. Steering rack bushings might be a close second. All these are searchable here.
How many miles do you have on your car? The front lower control arm bushings are notorious for wearing out and seriously degrading ride quality. The rear CA bushings wear too, as well as the front upper CA bushings, but they seem to take substantially longer to get to the condition of the lower fronts. Steering rack bushings might be a close second. All these are searchable here.
The cheapest so far for rack/pinion steering bushing set is from Daizen at around 40 not including shipping: http://www.tmengineering.net/suspens...n/make/sc.html . However, prothane sells the suspension bushings front and rear for much cheaper. FRONT: http://performance.yoparts.com/i-142511.aspx REAR: http://performance.yoparts.com/i-142524.aspx
-Nick
-Nick
Trending Topics
The rear upper control arm bushings are a PITA to change. If you decide to this, I would lower the whole rear subframe of the car. Its real tight in there. Its what I did and made life alot easier, if you have the tools and jackstands.
Thread
Thread Starter
Forum
Replies
Last Post
Ahheck01
Suspension and Brakes
8
Jan 12, 2015 06:27 PM
fabioso10
2Gen GS430 / 400/ 300 Classifieds (98-05)
8
Sep 12, 2008 06:49 AM
akitamike
SC - 1st Gen (1992-2000)
2
Jul 9, 2006 03:47 AM




