Notices
SC - 1st Gen (1992-2000)

Oxygen Sensor Interchange for 1JZ

Thread Tools
 
Search this Thread
 
Old Feb 12, 2009 | 09:20 PM
  #1  
shern's Avatar
shern
Thread Starter
Lexus Champion
iTrader: (6)
 
Joined: Oct 2006
Posts: 2,468
Likes: 2
From: AZ
Default Oxygen Sensor Interchange for 1JZ

Team

What are some part number options (or vehicle options) for sourcing an oxygen sensor for the 1JZ? I think my O2 sensor is done.

Thanks
Reply
Old Feb 14, 2009 | 11:02 AM
  #2  
shern's Avatar
shern
Thread Starter
Lexus Champion
iTrader: (6)
 
Joined: Oct 2006
Posts: 2,468
Likes: 2
From: AZ
Default

I pulled the O2 sensor from the 1JZ. It's a three wire type.

I found a MK4 O2 sensor from a 1993 that is 3 wire exactly like the one I have. It's pretty expensive though. Cheapest I found is $121 at Rock Auto.

Bosch 13910

Last edited by shern; Feb 14, 2009 at 12:30 PM.
Reply
Old Feb 14, 2009 | 11:18 AM
  #3  
Ryeno's Avatar
Ryeno
Banned
iTrader: (3)
 
Joined: Sep 2008
Posts: 1,262
Likes: 0
From: NA
Default

The jzz30 has a weird part diagram image. It shows :
(note, their are multiple part #s because one of the numbers got succeed by another)
Sensor, OXYGEN
89465‑29435 JZZ30
89465‑80015

SENSOR, EXHAUST GAS TEMPERATURE
89425‑29575 JZZ30
89425‑29855 JZZ30
89425‑29865 JZZ3*

As for the Supra

SENSOR, OXYGEN
89465‑19595 JZA80..TWT; RR
89465‑19605 JZA80..TWT; FR
and this gasket
89466‑20020

Now here is the interesting part. The soarer o2 sensor looks like a normal o2 sensor, the exhaust gas sensor looks just like the supra o2 sensor with the supra gasket on it.(your pic)
Reply
Old Feb 14, 2009 | 11:36 AM
  #4  
shern's Avatar
shern
Thread Starter
Lexus Champion
iTrader: (6)
 
Joined: Oct 2006
Posts: 2,468
Likes: 2
From: AZ
Default

Can you pull the numbers for the JDM MK3 Supra 1JZ JZA70?

And then pull the numbers for the USDM MK3 7M?
Reply
Old Feb 14, 2009 | 12:04 PM
  #5  
shern's Avatar
shern
Thread Starter
Lexus Champion
iTrader: (6)
 
Joined: Oct 2006
Posts: 2,468
Likes: 2
From: AZ
Default

I found the part number on the O2 sensor. It is:

89465-22130

Doesn't match with the JZZ30/JZA70 1JZ.

I found out on SF that most of the guys run the MK3 7M oxygen sensors. However, mine is a heated 3 wire so those single wires may not work. I think I'll be buying the Bosch 3 wire.

Last edited by shern; Feb 14, 2009 at 12:19 PM.
Reply
Old Feb 14, 2009 | 07:29 PM
  #6  
RyanV's Avatar
RyanV
Lexus Test Driver
iTrader: (9)
 
Joined: Jan 2008
Posts: 1,311
Likes: 3
From: Texas
Default

I'd get the 3 wire too.
Reply
Old Feb 14, 2009 | 09:18 PM
  #7  
matrixgts's Avatar
matrixgts
Lead Lap
iTrader: (1)
 
Joined: Jul 2008
Posts: 766
Likes: 0
From: nc
Default

i know they are expensive.thats why i bought mine on the e the place where no one like to talk about i changed all 3 and so far for almost a yr now it's working fine.
Reply
Old Feb 15, 2009 | 09:57 AM
  #8  
SpinAll4's Avatar
SpinAll4
Former Sponsor - Cancelled
 
Joined: Oct 2005
Posts: 263
Likes: 1
From: Utah
Default

Don't go the Bosch route unless you have to. I've heard they're not as good of unit as a Denso/NTK and my personal experience with them was that I was not impressed.
Reply
Old Feb 24, 2009 | 07:45 PM
  #9  
shern's Avatar
shern
Thread Starter
Lexus Champion
iTrader: (6)
 
Joined: Oct 2006
Posts: 2,468
Likes: 2
From: AZ
Default

Update

I received the Bosch 13910 and quickly did a comparison. The form factor is a bit different between the two but the connector is exactly the same. I installed it and plugged it right up. Fired right up. A quick drive around the neighborhood is showing good results. No issues at idle or WOT. The car is definitely not running as rich as it was before.

Damn, does the sensor say NTK on it?





Last edited by shern; Feb 24, 2009 at 07:49 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
S160dre
GS - 2nd Gen (1998-2005)
3
Aug 11, 2016 06:36 AM
ADENNARD
RX - 2nd Gen (2004-2009)
7
May 21, 2013 06:27 AM
SMUChris
ES - 1st to 6th Gen (1990-2018)
2
Dec 17, 2012 03:50 AM
lpolo69
SC - 1st Gen (1992-2000)
6
Aug 27, 2006 12:51 PM
PES300
ES - 1st to 6th Gen (1990-2018)
3
Oct 22, 2005 11:50 AM




All times are GMT -7. The time now is 09:55 PM.