Does anyone have a part # for the starter contacts? This is for a 93 SC 300. Thanks.

 

By contacts do you mean the brush? If so, the part number for the brush/holder is 2814076070.

Here are the rest of the pieces:

Armature - 2816074070
Bearing - front: 9009910196, rear: 9009910197
Brush - 2814076070
Drive/Bendix - 2801176070
Solenoid - 2815046120

EDIT: These are for a 1993 SC300

 

Starter.........part of an engine, no?

Moved.

 

thanks for the part #'s!

 

This is what I need to replace, http://yotarepair.com/startercontacts.html The car isnt starting right, seems like a common problem, and replacing the contacts is the fix?

 

Can't find the part number for those pieces, but it may be part of the brush/holder. I'm sure your local auto store has these starter repair kits or try calling your local dealer.

 

Can anyone confirm that is the part which needs to be replaced? We try to start the car and it just clicks. Takes a few times before the car starts.

 

This is the write up Ive been looking at. http://www.4crawler.com/4x4/CheapTri...rter.shtml#Fix That gives different part #'s.

 

i did this procedure on an lx before. easy to do and cheaper than buying a new starter. i went to the dealer, have them pull up the diagram on the computer and pointed to them what i wanted.

 

Figured thats what Id have to do. Will be going in tomorrow morning, thanks.

 

Alright guys, heres the document. Parts should be here Wednesday.

 

Just finished the install, very easy to do.

 

So what did the part number end up being?

 

28226- 76070 for one side, the other was 28226- 74070.

If anyone is doing this on a SC300 and wants a write up, then PM me.

 

You're a life saver!