97-00 Cheap Fog Light Solution
#31
Lexus Test Driver
#34
Lexus Test Driver
Join Date: Mar 2006
Location: Lake Ray Hubbard
Posts: 845
Likes: 0
Received 0 Likes
on
0 Posts
Nice. Think of the possibilities. Put it flush & throw a plug & play HID kit in there & you're set. I like your creativity. It's like $40 a day for the SC community(rachael ray reference). Low buck, effective mods that are slightly off the beaten path.
#41
Pole Position
Thread Starter
iTrader: (2)
Join Date: Feb 2007
Location: fl
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys ... sorry this is taking so long. I just got ac components in and that will have to take precedence. I cant be without air any longer. Been broken a while. I imagine beam pattern is gonna blow away the stock pattern. These are H3s.
I still have to figure out why my fogs are not working.
I still have to figure out why my fogs are not working.
#42
Lexus Test Driver
Join Date: Mar 2006
Location: Lake Ray Hubbard
Posts: 845
Likes: 0
Received 0 Likes
on
0 Posts
just cheat. wire them directly to the battery and put on an in-line fuse, then put a switch in the passenger compartment. then you can run the fogs whenever your heart desires.
#43
Pole Position
Thread Starter
iTrader: (2)
Join Date: Feb 2007
Location: fl
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
I just need a few minutes to go thru and try to find out whats wrong. I bet the relay has been taken out when the car was hit so as to not short out the wires. I have an electrical diagram, but it doies not show realy location. It just says under dash kickpanel. Does anyone know location? Could someone take a pic?
Of course, the AC has to go inm b4 the fogs....it gets hot here in hell, I mean florida.
#44
Pole Position
Thread Starter
iTrader: (2)
Join Date: Feb 2007
Location: fl
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
Well, progress has been made. They are on the car, but of course not yet working. They really look like the Viper fogs. Once again, they are personal taste, but I think better than stock...
#45
Pole Position
Thread Starter
iTrader: (2)
Join Date: Feb 2007
Location: fl
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
I was impatient with the harness, and also because mine was chewed anyway, I just cut the wires and used a Lexus harness I had laying around...I think with soime patience and careful trimming, they weould have hooked up to our stock harness.