Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
- IS ES GS: Lowering Modifications
Important information to help you understand your Lexus
- How to Mount a Tire to your Rim
Step by step instructions for do-it-yourself repairs
- Tires General Information and Specs
Important information to help you understand your Lexus
Browse all: Steering and Suspension
Browse all: Tires and Wheels Guide
****Official Wheel & Tire Fitment Guide for SC300/SC400****
#2012
Pole Position
Join Date: Dec 2007
Location: Wellington New Zealand
Posts: 235
Likes: 0
Received 2 Likes
on
2 Posts
I got a 97 SC300. I'm looking through all the posts, and not sure of totally what to do. Go with a 18" or 19". I'm thinking bout going with Work Emotion XD9 rims. They only go to 18", and i plan on getting the JIC Kit eventually, but rims first. Don't really wanna roll my fenders if i don't have too. Any suggestions?
Matt.
#2013
got one for ya guys! 18 x 10s all around +24 et, wrapped by 245/40 front and 255/40 rear...can i get away with a good roll all around? planning on droppin with CS 1.5inches or so
#2014
Pole Position
iTrader: (4)
Hey guys, I plan on purchasing a set of Weds Kranez Cerberus
18x9.5
18x10.5
-0 offset on both.
Would I be able to fit them onto the car with or without spacers? I own a 1994 Sc300. I know I will need fender modifications, but I'm more concerned about having the wheels actually fit and mounted on. Thanks in advance.
-Nathan
18x9.5
18x10.5
-0 offset on both.
Would I be able to fit them onto the car with or without spacers? I own a 1994 Sc300. I know I will need fender modifications, but I'm more concerned about having the wheels actually fit and mounted on. Thanks in advance.
-Nathan
#2015
Driver School Candidate
Join Date: Nov 2008
Location: Kansas
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I'm putting the Stance GR+ suspension on and going to buy some Forgeline GX3R wheels. I'm looking at putting 19x10's on the rear with 285/30's on them. I'm thinking of running a 40mm ofset. For the fronts I'm looking to run 18x8's with 235/45's. Probably going to run the Goodyear F1 GSD3 tires. Since they are practically square their is no stretching them, and I personally hate the look and feel of stretched tires. This is for a project car I'm building. Probably going to be running the Veilside executive body kit as well. Any insite on this combo. I'm thinking about maybe choosing a different forgeline wheel and run 20's on the rear with 18's up front. I've always liked that look.
#2016
Lexus Fanatic
iTrader: (10)
Hey guys, I plan on purchasing a set of Weds Kranez Cerberus
18x9.5
18x10.5
-0 offset on both.
Would I be able to fit them onto the car with or without spacers? I own a 1994 Sc300. I know I will need fender modifications, but I'm more concerned about having the wheels actually fit and mounted on. Thanks in advance.
-Nathan
18x9.5
18x10.5
-0 offset on both.
Would I be able to fit them onto the car with or without spacers? I own a 1994 Sc300. I know I will need fender modifications, but I'm more concerned about having the wheels actually fit and mounted on. Thanks in advance.
-Nathan
#2017
Pole Position
iTrader: (4)
Do you have any suggestions as to what size tires I should be running?
I really don't know a lot about tires and its my first time having wheels this wide so anything would help. I want it to be stretched out but not too much. Again the size of the wheels are 18x9.5 18x10.5 Thanks!
- Nathan
I really don't know a lot about tires and its my first time having wheels this wide so anything would help. I want it to be stretched out but not too much. Again the size of the wheels are 18x9.5 18x10.5 Thanks!
- Nathan
#2018
Driver School Candidate
Join Date: Jun 2008
Location: Texas
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
#2019
would i be able to put a set of mmr h2 wheels on my sc400? it still has stock suspension and sits a stock height.. 19x9.5 rears +35mm offset, 19x8.5 fronts +35mm offset.. would they fit without rolling the fenders?
#2021
Do you have any suggestions as to what size tires I should be running?
I really don't know a lot about tires and its my first time having wheels this wide so anything would help. I want it to be stretched out but not too much. Again the size of the wheels are 18x9.5 18x10.5 Thanks!
- Nathan
I really don't know a lot about tires and its my first time having wheels this wide so anything would help. I want it to be stretched out but not too much. Again the size of the wheels are 18x9.5 18x10.5 Thanks!
- Nathan
Why dont people take their time and go through this thread, figure out what actually fits their cars based off other peoples experience, and go from that? I mean there is the odd crazy person who will fit a car to wheels, but how many actually are willing to fit wheels on a car, with extensive modification of course.
#2023
Can someone please let me know if this will fit my SC with no fender modifications and on the stock suspension.
Fronts: 18x8 +29 235/40/R18
Rears: 18x9 +29 265/35/R18
Thanks!
Also: if it doesn't rub or doesn't require any modifications with this setup, can I drop it with Eibach Pro Springs w/o any issues?
Fronts: 18x8 +29 235/40/R18
Rears: 18x9 +29 265/35/R18
Thanks!
Also: if it doesn't rub or doesn't require any modifications with this setup, can I drop it with Eibach Pro Springs w/o any issues?
#2024
Can someone please let me know if this will fit my SC with no fender modifications and on the stock suspension.
Fronts: 18x8 +29 235/40/R18
Rears: 18x9 +29 265/35/R18
Thanks!
Also: if it doesn't rub or doesn't require any modifications with this setup, can I drop it with Eibach Pro Springs w/o any issues?
Fronts: 18x8 +29 235/40/R18
Rears: 18x9 +29 265/35/R18
Thanks!
Also: if it doesn't rub or doesn't require any modifications with this setup, can I drop it with Eibach Pro Springs w/o any issues?