New base boost dyno #'s
Thread Starter
Lead Lap
Joined: Jul 2002
Posts: 790
Likes: 5
From: Illinois
New base boost dyno #'s
Larry spent some time on the dyno today doing some tuning now that we have a few break in miles on the 3.2 so we did a few pulls on base boost (22psi) spring. It only crept up to about 24-25psi on 2 pulls.
Very conservative timing on C16. Cam timing needs to be played with, there should be a good amount of power there.
25psi
739rwhp
forgot the torque # (larry will have to chime in)
Not bad first time on the dyno with this setup.
Setup
SP 3.2L stroker
Custom Crane cams
Headwork
47-80
SP race header
SP intake
Here are just a couple pics of the engine bay with a BADASS SP 6" cold air intake pipe!
Chris
Very conservative timing on C16. Cam timing needs to be played with, there should be a good amount of power there.
25psi
739rwhp
forgot the torque # (larry will have to chime in)
Not bad first time on the dyno with this setup.
Setup
SP 3.2L stroker
Custom Crane cams
Headwork
47-80
SP race header
SP intake
Here are just a couple pics of the engine bay with a BADASS SP 6" cold air intake pipe!
Chris
Trending Topics
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
Top 10 Most Confusing Things Lexus Has Ever Done!
Joe Kucinski
2026 Lexus ES Review: Lexus Re-Embraces Founding Principles
Michael S. Palmer
10 Lexus Bargains That are Cheaper Than a New Toyota RAV4
Joe Kucinski
8 Weirdest Things Lexus Has Ever Built
Verdad Gallardo
10 Lexus Designs That Have Aged Like Fine Wine
Verdad Gallardo
8 Tips for Improving Your Hybrid or Plug-in Hybrid's Efficiency!
Michael S. Palmer
10 Best Lexus Models No One Remembers
Joe Kucinski
TRD Off-Road Premium: Best 2026 4Runner, Except This One Thing
Michael S. Palmer
Top 10 Lexus & Toyotas to Drive Before You Die!
Joe Kucinski
Thread Starter
Lead Lap
Joined: Jul 2002
Posts: 790
Likes: 5
From: Illinois
Originally Posted by SupraCoup3
Chris, looks great, but isn't that turbo a little small?
next time, maybe opt for a housing that can fit one of these guys...
next time, maybe opt for a housing that can fit one of these guys...
ROFL!!!!!!!!!!! You've accidentally stumbled onto my next setup
Thanks again guys.
Jon, there is always 7" LOL. Someone said to me at the shop, after seeing the intake pipe " this would be the only time I'm happy to say something is 6 inches" LOL
Chris
Lead Lap
Joined: Sep 2005
Posts: 456
Likes: 0
From: TX
Originally Posted by quikturbo
ROFL!!!!!!!!!!! You've accidentally stumbled onto my next setup
Thanks again guys.
Jon, there is always 7" LOL. Someone said to me at the shop, after seeing the intake pipe " this would be the only time I'm happy to say something is 6 inches" LOL
Chris
Thanks again guys.
Jon, there is always 7" LOL. Someone said to me at the shop, after seeing the intake pipe " this would be the only time I'm happy to say something is 6 inches" LOL
Chris
I just want to know how fast this thing will do the Kessel Run....
Originally Posted by Psionic
"Yeah, its 6 inches... 6 inches WIDE!!!"
I just want to know how fast this thing will do the Kessel Run....
I just want to know how fast this thing will do the Kessel Run....
Kessel run in 3.2 light seconds. But when he hits 88.8 MPH the flux capacitor kicks in anyway.
Dude you better have a good filter on that turbo inlet because you'll probably be sucking in pedestrians and small animals.
Thread Starter
Lead Lap
Joined: Jul 2002
Posts: 790
Likes: 5
From: Illinois
If women heard that Psionic, I'm sure they'd run for their life!! LOL
I have Tein SS coilovers on the car
lfrers, I may have to put a safety sticker on the bumper to warn people from getting to close. Otherwise I can have the car dual as a streetsweeper
I have Tein SS coilovers on the car
lfrers, I may have to put a safety sticker on the bumper to warn people from getting to close. Otherwise I can have the car dual as a streetsweeper
