Notices
SC - 1st Gen (1992-2000)

Just dyno'd the 1JZ!

Thread Tools
 
Search this Thread
 
Old Mar 3, 2006 | 06:30 PM
  #1  
kaosman's Avatar
kaosman
Thread Starter
Driver
 
Joined: Oct 2005
Posts: 197
Likes: 0
From: CA
Post Just dyno'd the 1JZ!

Just dyno'd the Lexus. Made 263 horsepower & 275 pound-feet of torque. Only modification was a "test" pipe.

One interesting note. I left the stock fuel pump in place, based on a calc I came up with a while back on fuel requirements for my 7s. Sure enough, the AFR was in the 10s at 5800 and above. Looks like the stock fuel pump is sufficient for the 1JZ. Should be good for more boost too, considering that high rpms are more taxing to an injector than boost. I'm not advocating a stock pump at 14 psi, but 12 should be safe. We'll find out in a little bit here.

Reply
Old Mar 3, 2006 | 06:41 PM
  #2  
BigManne's Avatar
BigManne
Lexus Test Driver
iTrader: (3)
 
Joined: Jan 2005
Posts: 1,224
Likes: 3
From: Landmass
Default

looking good man
Reply
Old Mar 3, 2006 | 11:36 PM
  #3  
Last5Spd's Avatar
Last5Spd
Pole Position
 
Joined: Jul 2005
Posts: 331
Likes: 0
From: CA
Default

wow not bad for just a test pipe...

which one u got?
Reply
Old Mar 3, 2006 | 11:42 PM
  #4  
rscott's Avatar
rscott
Lexus Test Driver
 
Joined: Nov 2003
Posts: 1,468
Likes: 0
From: California
Default

this was at 14 psi or stock boost?
Reply
Old Mar 4, 2006 | 12:03 AM
  #5  
blacksc400's Avatar
blacksc400
Car Chat Moderator
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (4)
 
Joined: Jan 2003
Posts: 10,146
Likes: 2
From: Las Vegas!
Default

wondering how much I am making with my FMIC. HKS BV, INtake, and straight 3' pipe!!
Reply
Old Mar 4, 2006 | 03:26 PM
  #6  
nimit1234's Avatar
nimit1234
Driver
 
Joined: Feb 2006
Posts: 113
Likes: 0
From: In
Default

OKay im a newb, and I want to 1jz my 5spd.. Can I keep stock everything except the suspension and exhaust? or can I leave those 2 alone too?.. Let me know.. thanks
Reply
Old Mar 4, 2006 | 04:17 PM
  #7  
VJ RC51's Avatar
VJ RC51
Lexus Champion
 
Joined: May 2005
Posts: 1,973
Likes: 0
From: Central FL
Default

i made 265rwhp on stock 10psi boost, awesome how close we are
Reply
Old Mar 4, 2006 | 05:46 PM
  #8  
atekt's Avatar
atekt
Lexus Test Driver
 
Joined: Oct 2005
Posts: 1,049
Likes: 0
From: UT
Default

Right on!Good numbers!Any vids?
Reply
Old Mar 4, 2006 | 06:02 PM
  #9  
onebadshot's Avatar
onebadshot
Pole Position
 
Joined: Jan 2006
Posts: 267
Likes: 0
From: Co
Default

Originally Posted by nimit1234
OKay im a newb, and I want to 1jz my 5spd.. Can I keep stock everything except the suspension and exhaust? or can I leave those 2 alone too?.. Let me know.. thanks
I'm new to this board and I can see how you guys get tired of this question......... nimit please use the search. I have been looking at doing this swap for over a month and I still havn't covered all the info out there on it.

As for the dyno im so excited considering a stock RX-7 only makes about 250hp and your really pushing your luck on a stock 13b at 14psi. Also is there any tuning done on the dyno on the stock 1jz?

Last edited by onebadshot; Mar 4, 2006 at 06:05 PM.
Reply
Old Mar 4, 2006 | 06:13 PM
  #10  
STRONG SC's Avatar
STRONG SC
Lead Lap
 
Joined: May 2005
Posts: 689
Likes: 0
From: CA
Default

damn nice numbers!! let us know w/ more mods1
Reply
Old Mar 5, 2006 | 09:05 PM
  #11  
kaosman's Avatar
kaosman
Thread Starter
Driver
 
Joined: Oct 2005
Posts: 197
Likes: 0
From: CA
Default

The "test pipe" was a one-off pipe made by a friend. Those numbers are at stock boost. I don't have any vids yet, but as soon as I get a new battery for my camcorder, I'll get some up.
Reply
Old Mar 5, 2006 | 10:34 PM
  #12  
Arizona's Avatar
Arizona
Lead Lap
 
Joined: Jul 2004
Posts: 520
Likes: 0
From: NJ-NYC
Default

Originally Posted by nimit1234
OKay im a newb, and I want to 1jz my 5spd.. Can I keep stock everything except the suspension and exhaust? or can I leave those 2 alone too?.. Let me know.. thanks
Yes and Yes? your stock exhaust will bolt up to the 1jz and what does suspension have to with a motor swap
Reply
Old Mar 6, 2006 | 12:26 AM
  #13  
blacksc400's Avatar
blacksc400
Car Chat Moderator
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (4)
 
Joined: Jan 2003
Posts: 10,146
Likes: 2
From: Las Vegas!
Default

for the swap, you can keep the exhaust and suspension stock and vhange evrything else.
Reply
Old Mar 6, 2006 | 09:33 AM
  #14  
VJ RC51's Avatar
VJ RC51
Lexus Champion
 
Joined: May 2005
Posts: 1,973
Likes: 0
From: Central FL
Default

A 1JZ any mods on stock cams seems to top out around 320ish rwhp on any boost level. Add some aftermarket cams and ppl seem to get around the 380 mark.
Reply
Old Mar 6, 2006 | 09:56 AM
  #15  
indypwr's Avatar
indypwr
Pole Position
20 Year Member
Photogenic
Photoriffic
Shutterbug
 
Joined: Mar 2002
Posts: 3,462
Likes: 2
From: California
Default

nice numbers......i wonder how many hp mine is putting out..
i am assumming close to 350 with fmic, colder plugs and EBC..
Reply



All times are GMT -7. The time now is 07:34 PM.