9sec SC300 video ROD KNOCK
G35x - RWD/AWD goodness
Joined: Jul 2001
Posts: 2,950
Likes: 1
From: Michigan
Originally Posted by quikturbo
That would be my car.
OLT, now that the car is finally down for the season, you can count on me sending my dash and climate control to you. I just want fairly basic, nothing too flashy, what do you recommend?
Also, I haven't had anytime to post, that I did pop my motor the other night at the track. It was DAMN cold, ran 38psi, more timing, and it was making way more horse!!!! Shut it down going into 4th and still ran a 9.97@117mph with a 1.41 60ft
Car will now be going down for the winter and I'll be building the motor. So next year should be very interesting
Chris
OLT, now that the car is finally down for the season, you can count on me sending my dash and climate control to you. I just want fairly basic, nothing too flashy, what do you recommend?
Also, I haven't had anytime to post, that I did pop my motor the other night at the track. It was DAMN cold, ran 38psi, more timing, and it was making way more horse!!!! Shut it down going into 4th and still ran a 9.97@117mph with a 1.41 60ft
Car will now be going down for the winter and I'll be building the motor. So next year should be very interesting
Chris
Was this done at the WI track? Were you able to drive it home?
Lead Lap
Joined: Jul 2002
Posts: 790
Likes: 5
From: Illinois
Thank you guys for the support 
Wolf, I made all of those passes at Great Lakes Dragaway in WI. I could have driven it home, however, I have AAA, so I get 4 free tows up to 100 miles each I just used one of my life lines.
Jon, long time no talk buddy. Hope married life is treating you well.
My new setup will be
Arias pistons
Crower h-beam rods
cleavite bearings
all ARP hardware (mains, rods, head studs, etc..)
SP modded oil pump
SP billet tensioner
Possibly some mild head work.
Chris
Wolf, I made all of those passes at Great Lakes Dragaway in WI. I could have driven it home, however, I have AAA, so I get 4 free tows up to 100 miles each
I just used one of my life lines.Jon, long time no talk buddy. Hope married life is treating you well.
My new setup will be
Arias pistons
Crower h-beam rods
cleavite bearings
all ARP hardware (mains, rods, head studs, etc..)
SP modded oil pump
SP billet tensioner
Possibly some mild head work.
Chris
Thread
Thread Starter
Forum
Replies
Last Post
MIGS
SC - 1st Gen (1992-2000)
19
Jul 9, 2011 08:44 AM
