I have been doing alittle reading on these cams and have a couple questions. There are three types the 256,265,272. I think I got them right? Both intake and exhaust are avalible but I havn't found any data on the rpm ranges other than the 272 isn't a good street cam due to the lack of vaccum.

Anyone have any good links with some info on them? I checked through one of the supra forums but didn't come up with much. Possibly from lack of effort

Any other brands, successes or disappointments?

I personally would like to see a operation range from 4500-7500 rpms. From what I have seen of dynos a mild cam may get this with the GTE, and appropreate turbo, fuel, timing, yadayadayada. I wouldn't be looking for huge number, lets say ~550 RWHP.

This is along way out but I like to get my research done in advance so I can just go on a huge shopping venture, oh god I sound like a woman.

 

if you are only looking for around 550hp then i would just get the 262's and get a mid sized turbo for a balance of spool along with power. i would search for a turbo with the characteristics you want along with keeping the boost down so you can run pump gas

 

Well I'm pretty sold on the SP63. I'm kinda thinking about the SP61GT but I dont know if it will deliever the power up top?

 

272's are a bit much and Supras have ran 9's on 264's. 264's should be fine for an SP63 car.

 

Here's another SC300 owner who installed aftermarket cams...

http://www.datapathusa.com/sc300.html

http://www.datapathusa.com/scott/crower.html


That's SC300T incase you're wondering

 

If tuned right, you can hit that number on stock cams with an SP63.

 

 

Hey thanks this is exactly what I'm looking for. I have no doubt that I can hit 550 whp but I want a little higher reving power band. Nothing to extreme just alittle more up top..