FS: Wood & Leather Steering Wheel (56k!! LARGE Pictures)
12-02-03, 01:23 PM
#16
RX 300 & 350Z Guru
Thread Starter
Join Date: Feb 2001
Location: Georgia
Posts: 3,256
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by whitels
It has a single yellow harness plugged into the middle part of the back of the airbag. Two tiny wires come out of the contacts, and these two wires then run inside a yellow plastic conduit/wrap/hose.
It has a single yellow harness plugged into the middle part of the back of the airbag. Two tiny wires come out of the contacts, and these two wires then run inside a yellow plastic conduit/wrap/hose.
Last edited by LexRX; 12-02-03 at 01:26 PM.
12-02-03, 02:12 PM
#17
Lexus Test Driver
Originally posted by LexRX
Ok, thanks - I was affirming what I had heard earlier about the pre-2001 and 2001 RX airbags having the same connector. So, for those with pre-2001 RX's wanting the oem wood/leather wheel, it is possible with a 2001 airbag. I just couln't find one - I wasn't paying $600+ for a new one.
Ok, thanks - I was affirming what I had heard earlier about the pre-2001 and 2001 RX airbags having the same connector. So, for those with pre-2001 RX's wanting the oem wood/leather wheel, it is possible with a 2001 airbag. I just couln't find one - I wasn't paying $600+ for a new one.
Excellent info. Guess, I lucked out big time on this deal. This probably needs to be sticked somewhere. There's tons of 99 and 00 folks wanting the wood wheel.
12-02-03, 05:45 PM
#18
RX 300 & 350Z Guru
Thread Starter
Join Date: Feb 2001
Location: Georgia
Posts: 3,256
Likes: 0
Received 0 Likes
on
0 Posts
I agree. I was asking because so many people want to do the swap and it is an issue for us pre-'01 RX's. We need to swap from old to new airbag, and the only newly shaped airbag that will work (at least as far as the connector goes) is the 2001 RX airbag.
Thanks again for your info.
Thanks again for your info.
Thread
Thread Starter
Forum
Replies
Last Post
lilti9er
RX - 3rd Gen (2010-2015)
32
01-28-16 08:06 AM