Wing nuts in the rear wheel wells
#1
Moderator
Thread Starter
Wing nuts in the rear wheel wells
Any one checked on the looseness of the winged nuts in the rear wheel wells. I found mine pretty lose.
Salim
Salim
The following users liked this post:
XF40FSPORT (09-08-17)
#3
Moderator
Thread Starter
They seem like a regular nuts which hold the felted liner to the body. I found all of them loose on mine and was wondering if the loose panel could be causing noise for folks. The wings are not large but allow a person to grab and tighten the nuts.
Vehicle: 450H .. just incase the wheel well panelling is different between 350 and 450
Salim
Vehicle: 450H .. just incase the wheel well panelling is different between 350 and 450
Salim
Last edited by salimshah; 08-30-17 at 09:33 AM.
The following users liked this post:
XF40FSPORT (09-08-17)
#5
Moderator
Mine were tight when I removed the covers to install paint on sound deadener a couple of years ago. I think there were also a couple of other fasteners of a different type. Have not rechecked since.
#6
Instructor
we have 106k miles on our 2010 350Rx, and they were loose. never checked them before even when working on the brakes. I doubt they're part of the chassis bolts that get tightened per the maintenance schedule.
Thread
Thread Starter
Forum
Replies
Last Post
Benoit
Wheels, Tires & Brakes Forum
2
04-25-19 01:49 AM
LexFather
Car Chat
9
11-13-07 08:48 AM