Notices
RX - 3rd Gen (2010-2015) Discussion topics related to the 2010 - 2015 RX350 and RX450H models

2012 RX350 driver's rear side marker

Thread Tools
 
Search this Thread
 
Old Jun 8, 2013 | 02:18 PM
  #1  
WithoutWax's Avatar
WithoutWax
Thread Starter
Driver School Candidate
 
Joined: Oct 2010
Posts: 7
Likes: 0
From: california
Default 2012 RX350 driver's rear side marker

Hi, I was wondering if anyone here knows where can I find a 2012 RX 350 rear driver side marker online? I have tried ebay and other local auto shops but they all seem to only have second generation RX models side marker, or have been told to go to dealership to get it fixed, however when I went to get a quote to get a replacement, the service department estimated that it will be close to $600 to get the part and to repair it. Now that is way to expensive fore me. All I need is the side marker and I can change it myself. So I hope someone here knows where I can find the part. I have attacked a picture of the injury that I must heal on my baby.
Attached Thumbnails 2012 RX350 driver's rear side marker-photo-1-.jpg  
Reply
Old Jun 8, 2013 | 02:26 PM
  #2  
RX330inFL's Avatar
RX330inFL
Lead Lap
 
Joined: May 2006
Posts: 3,999
Likes: 37
From: FL
Default

Believe this to be what you are looking for:

http://lexus.sewellparts.com/oem-cat...X350-2012.html
Reply
Old Jun 8, 2013 | 04:20 PM
  #3  
WithoutWax's Avatar
WithoutWax
Thread Starter
Driver School Candidate
 
Joined: Oct 2010
Posts: 7
Likes: 0
From: california
Default

oh wow thanks a whole bunch, but I am a bit confused as to which one to get, there are two left side markers, one says lens body and another says lamp assembly. The light still works so does that mean I should get the lens body? and why the price difference? Thanks again for the quick reply!!
Reply
Old Jun 8, 2013 | 05:40 PM
  #4  
RX330inFL's Avatar
RX330inFL
Lead Lap
 
Joined: May 2006
Posts: 3,999
Likes: 37
From: FL
Default

Perhaps a call to Sewell's Parts Department on Monday with the part numbers is in order to better understand what you would be ordering.
Reply
Old Jun 9, 2013 | 05:26 AM
  #5  
kitlz's Avatar
kitlz
No, I don't play soccer!
 
Joined: Jul 2009
Posts: 6,652
Likes: 177
From: NJ
Default

Sewell is also a CL vendor. You can PM them with your request and probably get a discount. Good luck.
Reply
Old Oct 28, 2014 | 12:11 PM
  #6  
smm3's Avatar
smm3
Pit Crew
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2011
Posts: 180
Likes: 7
From: MS
Default

My GF has a 2012 RX 350 and her rear left marker bulb is out. I haven't had a chance to see it in person yet, but is the bulb easy to change? Does the lens come off from the front or is there some sort of a panel that comes off from under the bumper cover to replace the bulb? I don't have her owner's manual so I don't know if it describes how to replace the bulb. Thanks in advance.
Reply
Old Oct 28, 2014 | 07:17 PM
  #7  
m1964's Avatar
m1964
Intermediate
 
Joined: Feb 2012
Posts: 280
Likes: 6
From: NY
Default

Originally Posted by smm3
My GF has a 2012 RX 350 and her rear left marker bulb is out. I haven't had a chance to see it in person yet, but is the bulb easy to change? Does the lens come off from the front or is there some sort of a panel that comes off from under the bumper cover to replace the bulb? I don't have her owner's manual so I don't know if it describes how to replace the bulb. Thanks in advance.
I believe that the access is from under the bumper.
Reply
Old Oct 30, 2014 | 09:04 AM
  #8  
bmaez's Avatar
bmaez
Pit Crew
 
Joined: Jul 2011
Posts: 165
Likes: 0
From: SC
Default

I had the same problem on my 11 IS except I didn't have sensors. For my repair the entire rear bumper cover had to come off.
Reply
Old Nov 14, 2014 | 08:24 AM
  #9  
smm3's Avatar
smm3
Pit Crew
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2011
Posts: 180
Likes: 7
From: MS
Default

Originally Posted by m1964
I believe that the access is from under the bumper.
Thanks for the information.
Reply
Old Nov 14, 2014 | 08:25 AM
  #10  
smm3's Avatar
smm3
Pit Crew
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2011
Posts: 180
Likes: 7
From: MS
Default

Originally Posted by bmaez
I had the same problem on my 11 IS except I didn't have sensors. For my repair the entire rear bumper cover had to come off.
I was afraid that this would be the case....thanks
Reply
Old Sep 18, 2016 | 12:52 PM
  #11  
CAC1's Avatar
CAC1
Rookie
 
Joined: Jul 2012
Posts: 28
Likes: 2
From: PA
Default Need to replace the entire assembly

Got tagged on the rear driver side corner and need some help to change out the entire assembly on my 2013 RX.
The part number I got from Amazon is LX2860103 @ about $93.
The image does NOT look to be the same as what is on my RX.

Could someone help me out with this and validate the part number for the entire assembly?
thanks




Reply
Old Sep 19, 2016 | 06:22 AM
  #12  
Clutchless's Avatar
Clutchless
CL Community Team
20 Year Member
Liked
Loved
Community Favorite
 
Joined: May 2005
Posts: 7,146
Likes: 1,710
From: VA
Default

www.lexuspartsnow.com
Reply
Old Sep 19, 2016 | 08:09 AM
  #13  
CAC1's Avatar
CAC1
Rookie
 
Joined: Jul 2012
Posts: 28
Likes: 2
From: PA
Default thanks, think I'll go after market

I can get an after market for $92 from amazon. I just hope the color is close to the original right side marker
Originally Posted by Clutchless
Reply
Old Sep 26, 2016 | 09:43 AM
  #14  
CAC1's Avatar
CAC1
Rookie
 
Joined: Jul 2012
Posts: 28
Likes: 2
From: PA
Default Replaced it

I bought the $93 replacement via Amazon. It is a perfect match and fit. Hardest part was taking off/replacing the skirt under the bumper. Lexus.com wanted $220 & my local dealer wanted $322.
Reply
Old Sep 26, 2016 | 09:55 AM
  #15  
Yurka's Avatar
Yurka
Intermediate
 
Joined: Dec 2011
Posts: 400
Likes: 15
From: NY
Default

^^ you can do it yourself, it just requires a screwdriver, flat head and about 20 mins under the car, i did that on my 2010 RX last Spring, its a straight forward and simple DIY. Take pans under the car off and thats it or you can partially pull them off and if you have a thin hand, just stick it in there and work like that, that way you don't need to take everything of.
Reply



All times are GMT -7. The time now is 11:21 AM.