When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My keyless entry on the month old 2011 RX350 unlocks the drivers door by just grabbing the handle. Does it have to be programed to unlock all the doors by grabbing it twice? Something I can program or is it a visit to the dealer? I figured I would get an answer here rather than go out in the cold garage and look it up in the owners manual! Thanks in advance.
Is it possible to program 1 button press on the remote to unlock all doors as well? I have my handle set to unlock all, but i'd like the remote to match that.
Should be the same, if you have your handle set to unlock all doors then the fob should unlock all the doors with 1 push of the button.
Hmm...that's what I would have figured, but it's not working that way. I'll go look at the settings menu again at lunch and see if i can figure it out.
Some of the programming requires that the RX is turned on, in park, and make sure you press the save button on the bottom.
crap - I "tested" this at lunch and it didn't work. You know what? I don't think I pressed "save". I'll give it another go. @X men, I think you're right - its a seperate setting and the default is "off". I'll set it to "on" (and save it) and see what happens.