Notices
RX - 2nd Gen (2004-2009) Discussion topics related to the 2004 -2009 RX330, RX350 and RX400H models

Sunroof electrical problems.

Thread Tools
 
Search this Thread
 
Old Oct 12, 2009 | 09:23 AM
  #1  
patrikr's Avatar
patrikr
Thread Starter
Driver School Candidate
 
Joined: Oct 2009
Posts: 1
Likes: 0
From: Sweden
Default Sunroof electrical problems.

Hi,
I've problems with the sunroof of my Rx400H.
My battery went dead once and after that the automatic opening and closing of the sunroff doesn't work. I need to press the switch all the time and release it exactly when th roof is closed.
Any ideas?
Reply
Old Oct 12, 2009 | 01:45 PM
  #2  
tazdevl's Avatar
tazdevl
Pole Position
15 Year Member
 
Joined: Sep 2006
Posts: 335
Likes: 1
From: CO
Default

Wrong forum. This is for the 2010 RX350 and 450.

Sounds like the switch needs to be replaced or the button needs to be programmed by your dealer. Sounds crazy but it happened to my wife's 2008 RX350. Both should be under warranty.
Reply
Old Oct 12, 2009 | 01:50 PM
  #3  
Cruiter's Avatar
Cruiter
Pole Position
 
Joined: May 2009
Posts: 2,838
Likes: 26
From: GA
Default

Originally Posted by patrikr
Hi,
I've problems with the sunroof of my Rx400H.
My battery went dead once and after that the automatic opening and closing of the sunroff doesn't work. I need to press the switch all the time and release it exactly when th roof is closed.
Any ideas?
This might help you.

When the moon roof does not close normally
Perform the following procedure:
l If the moon roof closes but then re-opens slightly
Press and hold the “CLOSE” switch.*1
The moon roof will close, reopen and pause for approximately 10 seconds.*
2 Then it will close again, tilt up and pause for approximately 1 second.
Finally, it will tilt down, open and close.
Check to make sure that the moon roof is completely closed and then
release the switch.
l If the moon roof tilts down but then tilts back up
Press and hold the “UP” switch*1 until the moon roof moves into the tilt up
position and stops.
Release the “UP” switch once and then press and hold the “UP” switch
again.*1
The moon roof will pause for approximately 10 seconds in the tilt up position.*
2 Then it will adjust slightly and pause for approximately 1 second.
Finally, it will tilt down, open and close.
Check to make sure that the moon roof is completely closed and then
release the switch.
*1: If the switch is released at the incorrect time, the procedure will have
to be performed again from the beginning.
*2: If the switch is released after the above mentioned 10 second pause,
automatic operation will be disabled. In that case, press and hold the
“CLOSE” or “UP” switch, and the moon roof will tilt up and pause for
approximately 1 second. Then it will tilt down, open and close. Check
to make sure that the moon roof is completely closed and then release
the switch.
If the moon roof does not fully close even after performing the above procedure
correctly, have the vehicle inspected by your Lexus dealer.
n Customization
Settings (e.g. linked door lock operation) can be changed.
(Customizable features →P. 666)
STEP 1
STEP 2
STEP 1
STEP 2
STEP 3
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
OttomLexus
ES - 1st to 6th Gen (1990-2018)
2
Apr 9, 2017 07:00 PM
Motard
GX - 1st Gen (2003-2009)
0
Dec 3, 2016 09:32 PM
cal1015
ES - 1st to 6th Gen (1990-2018)
2
Apr 21, 2014 12:48 PM
HOLGER21
GS - 2nd Gen (1998-2005)
3
Sep 20, 2012 09:29 PM
t0e
IS - 2nd Gen (2006-2013)
3
Dec 28, 2006 11:42 AM




All times are GMT -7. The time now is 08:34 AM.