'07 - '08 Nerf Bar
#1
Driver School Candidate
Thread Starter
Join Date: May 2007
Location: WA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
'07 - '08 Nerf Bar
Hi All - I'm wondering if anyone would have suggestions on a quality nerf/side-step Bar for the '07-'08 RX350?
Based on some internet research, I've found a few, that I think would fit based on what's published (of course you'll want to confirm prior to any transactions).
WAAG: Black PC Only
EFX: SS Only; this only list '07, assume site isn't updated yet
Aries: SS and Black PC; list '07, but 330; assume site isn't updated
U-Gaurd: SS; list '07-'08 SS Only
So these are the only manufactures that I have found that come close to having models for '07+/RX350 - but there are many more for the 330, they don't list it for 350, however. Feel free to add anymore that I've missed.
Based on some internet research, I've found a few, that I think would fit based on what's published (of course you'll want to confirm prior to any transactions).
WAAG: Black PC Only
EFX: SS Only; this only list '07, assume site isn't updated yet
Aries: SS and Black PC; list '07, but 330; assume site isn't updated
U-Gaurd: SS; list '07-'08 SS Only
So these are the only manufactures that I have found that come close to having models for '07+/RX350 - but there are many more for the 330, they don't list it for 350, however. Feel free to add anymore that I've missed.
#2
Step
Sewell sells a nice step for the RX350. They list them on eBay
http://cgi.ebay.com/ebaymotors/New-L...spagenameZWDVW
http://cgi.ebay.com/ebaymotors/New-L...spagenameZWDVW
#3
Pole Position
Join Date: Feb 2007
Location: Lone Star
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
Sewell sells a nice step for the RX350. They list them on eBay
http://cgi.ebay.com/ebaymotors/New-L...spagenameZWDVW
http://cgi.ebay.com/ebaymotors/New-L...spagenameZWDVW
#4
Driver School Candidate
Thread Starter
Join Date: May 2007
Location: WA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Keys and Sama...it does look good. I've seen an aftermarket one as well, but I think I prefer this one offered by Sewell.
I went to their website, but could not locate this item? Am I looking in the right place? I checked out e-bay too.
I went to their website, but could not locate this item? Am I looking in the right place? I checked out e-bay too.
#5
Moderator
I have Jaos on my 99RX300 push bars and skid plate. I dont know if the same will fit the newer 330/350. The sweep is different. It has been 8yrs and the stainless steel has no stains (or rust). The welds are still solid and the the attachment(s) are still holding strong.
Sooo, I can vouch for Jaos quality, complain about their high prices and forewarn that they like to plaster their name on products.
In the end, don't skimp on quality even if it comes with a higher price tag.
Also with the add on, you may do better in low speed impact but at med or high speed accident, most probably you RX will suffer much more.
Salim
Sooo, I can vouch for Jaos quality, complain about their high prices and forewarn that they like to plaster their name on products.
In the end, don't skimp on quality even if it comes with a higher price tag.
Also with the add on, you may do better in low speed impact but at med or high speed accident, most probably you RX will suffer much more.
Salim
Thread
Thread Starter
Forum
Replies
Last Post