RX - 2nd Gen (2004-2009) Discussion topics related to the 2004 -2009 RX330, RX350 and RX400H models

RX330 Oil Filter Location? How?

Thread Tools
 
Search this Thread
 
Old 03-27-04, 06:15 AM
  #16  
parula
Instructor
 
parula's Avatar
 
Join Date: Mar 2002
Location: NV
Posts: 1,026
Received 2 Likes on 2 Posts
Default

Salim, I agree, oil change isn't bad it is that filter location that makes the process BAD. Using synth. I am considering changing the filter only every other change or about every 9-10k to save the filter change mess that just seems unavoidable.

The annoying thing is lst time I had the dealer change it on the'03 THEY got oil all over and it took days to burn off where normally they somehow clean it all off, maybe they powerwash it and forgot the last time.,

Last edited by parula; 03-28-04 at 04:48 PM.
Old 03-28-04, 12:01 AM
  #17  
HarrierAWD
Lexus Champion
 
HarrierAWD's Avatar
 
Join Date: Jan 2003
Location: Colorado
Posts: 2,754
Likes: 0
Received 5 Likes on 5 Posts
Default

They should wipe the dirty oil off the engine mount (I think that's what it is,) which sits under the oil filter. My local Toyota service tech seemed to have done so. No oil dripping afterwards.
Old 03-28-04, 08:01 AM
  #18  
CK6Speed
Super Moderator
iTrader: (1)
 
CK6Speed's Avatar
 
Join Date: Nov 2002
Location: HI
Posts: 7,719
Likes: 0
Received 2 Likes on 1 Post
Default

Originally posted by nyca
all the German cars are easy, even the front driver Audi/VWs.

Honda is bad, Mitsubishi was easy, apparently Toyota is bad also.

you can save alot of money doing your own routine maintenance compared to dealer costs.
It's not that bad. Granted, changing the oil filter on my E36 BMW was really easy, but the entire oil change itself takes about the same amount of time as my Honda/Acura cars. I see my RX330 as no different. So it takes an extra 2-5 minutes to do a complete oil change job on a Honda or Toyota. That to me is not a big deal and certainly no reason to pass on a vehicle for that reason alone. Besides, what is so hard on a Honda? The oil filter is accessed from the bottom but there is nothing in the way. You jack up the car (Having a lift is even better) and reach up and remove the filter. It really is no big deal since you have to be under the car anyway to access the oil drain bolt.
Old 03-29-04, 08:42 AM
  #19  
peaceful97
Driver School Candidate
 
peaceful97's Avatar
 
Join Date: Dec 2003
Location: California
Posts: 36
Received 0 Likes on 0 Posts
Default

johnnieliu,
I changed my RX330 oil filter about a month ago and I'd like to correct one thing. The oil filter of the RX330 IS NOT at the same location as the RX300. On my RX330, the oil filter is underneat of the front engine. You just remove TEN bold and 3 clips(there was a post a while ago with an instruction of how to change oil filter for RX330) and the oil filter is right there. ofter removing the plastic cover, you can remove the oil filter very easily. I found it not that difficult to replace the oil filter as the mater of fact. the hardest part I guess it would be to remove the TEN bolds, but if you have the right size socket then it's very easy to remove those bolds.
Old 06-16-13, 12:37 PM
  #20  
khanakhtar
Driver School Candidate
 
khanakhtar's Avatar
 
Join Date: Oct 2008
Location: NJ
Posts: 4
Received 0 Likes on 0 Posts
Red face oil filter dry

Guys i have 2004 lexus rx 330. I just remove my oil filter for oil changed and surprisingly i found oil filter is completely dry. I checked with inspection mirror there is no blockage. Could any body help me why oil is not going through the oil filter. It must be bad for engine thanks in advance.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lexmex
RX - 1st Gen (1999-2003)
13
12-13-16 06:42 PM
kimsey
LS - 3rd Gen (2001-2006)
17
12-01-15 03:00 PM
Todd
RX - 2nd Gen (2004-2009)
5
07-15-07 11:54 AM
ntran18
Maintenance
23
11-30-04 11:20 AM
lexian
RX - 1st Gen (1999-2003)
10
07-29-02 09:31 AM



Quick Reply: RX330 Oil Filter Location? How?



All times are GMT -7. The time now is 01:20 AM.