2001 RX 300 No Nav CPU Video Input (Nav buttons and wiring in place)
#31
Driver School Candidate
Join Date: Apr 2015
Location: London
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Reverse Camera
Do you also know what the 4 plugs (2 Blue & 2 White) at the back of the head unit is for. There is an adaptor sold online which has 6 pins like in picture. It is just an adaptor or do you need something more advanced to decode the signal from reverse camera to the head unit?
#32
Hey gazi. The SL2Vu is almost impossible to find here in Europe. Can you please let me know if the SL2Vu adaptor connects to the plugs in the boot or direct to the back of the head unit?
Do you also know what the 4 plugs (2 Blue & 2 White) at the back of the head unit is for. There is an adaptor sold online which has 6 pins like in picture. It is just an adaptor or do you need something more advanced to decode the signal from reverse camera to the head unit?
Do you also know what the 4 plugs (2 Blue & 2 White) at the back of the head unit is for. There is an adaptor sold online which has 6 pins like in picture. It is just an adaptor or do you need something more advanced to decode the signal from reverse camera to the head unit?
#34
The red circle white plug (6 Pins) for add extra video in for the gps nav screen display. It has different shape. You could try to get 6 pin male plug for your female plug which you showed in your previous post for feed video in. It is easy to remove the white plug and if you not find the male plug You may solder the wiring. It is up to you.
#35
Driver School Candidate
Join Date: Apr 2015
Location: London
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Reverse camera
The red circle white plug (6 Pins) for add extra video in for the gps nav screen display. It has different shape. You could try to get 6 pin male plug for your female plug which you showed in your previous post for feed video in. It is easy to remove the white plug and if you not find the male plug You may solder the wiring. It is up to you.
So that I can cut the connector off & solder AV connectors to feed the video from reverse camera.
Thanks again.
#36
Wow, thanks gazi. So which means you can connect a feed from a reverse camera to the 6 pin connector & view on head unit screen? Would you happen to know what the 6 pin connectors are for?
So that I can cut the connector off & solder AV connectors to feed the video from reverse camera.
Thanks again.
So that I can cut the connector off & solder AV connectors to feed the video from reverse camera.
Thanks again.
Thread
Thread Starter
Forum
Replies
Last Post
cbuhrman1
RX - 1st Gen (1999-2003)
5
09-20-14 02:41 AM
benbuilt4u
3Gen GS460 / 450H / 430 / 350 / 300 Classifieds (06-12)
4
03-13-12 07:34 AM