New Goodies - Hibernation is almost over!
#31
hacksawed the bolt to size
filled with hot glue
painted
Final Look
#32
Intermediate
Thread Starter
I figure a detailing shop / paint shop could do the same. I actually enjoy putting final detail touches on by myself, so I did the pieces myself. Even details as simple as the two bottom bolts for licence plate cover (that we are unable to screw in):
hacksawed the bolt to size
filled with hot glue
painted
Final Look
hacksawed the bolt to size
filled with hot glue
painted
Final Look
The following users liked this post:
MrJeager (05-02-19)
The following users liked this post:
MrJeager (05-03-19)
#34
Intermediate
Thread Starter
haha! It’s true though, I at least had black plastic screws so all I had to do was clip them and file them a bit so no pointy ends scratched the paint. But not having the complete look and leaving two empty holes was unacceptable.
The following users liked this post:
MrJeager (05-03-19)
#37
Intermediate
Thread Starter
#38
Intermediate
Thread Starter
Installed my LED lights throughout the whole car ( visors, doors, foot wells, trunk and reverse lights).
Installed my LED lights throughout the whole car ( visors, doors, foot wells, trunk and reverse lights).
Installed my LED lights throughout the whole car ( visors, doors, foot wells, trunk and reverse lights).
The following users liked this post:
jpeezyGS (05-15-19)
#40
Intermediate
Thread Starter
They were super easy to install, I also searched on YouTube and this one guy had a video for all of them. Extremely easy and changed the whole look of the interior. I’m surprised Lexus didn’t include LED’s to begin with. Super cheap mods which give it that updated modern look.
#41
Intermediate
Thread Starter
Just got my car back from the dealership and I got the following done all through warranty:
1. Front and rear brake pads (updated no squeak ones) part numbers: 04465-0W200 and 04466-0W080. Due to minor squeaking.
2. I had AC issues as it wasn't blowing cold. They noticed that the system was half empty (or half full lol) and they topped it off and did a leak test and saw no visible leaks. They checked the Lexus Canada system and saw that there was past AC work done and feel that they might not have topped it up. they swapped out the service valves in case a leak was coming from there but all should be good now.
3. I had a buzzing/distortion coming from the right door speaker when there was a song with heavier bass playing. they replaced the speaker.
4. For a quick customization feature and a $31 CAD with tax cost, I decided to cancel out my no seat belt chime.
NEXT:
1. Will be doing the resonator delete Saturday and will be putting on the spacers hopefully this weekend as well. I need to find the torque specs for this and do a little more research.
1. Front and rear brake pads (updated no squeak ones) part numbers: 04465-0W200 and 04466-0W080. Due to minor squeaking.
2. I had AC issues as it wasn't blowing cold. They noticed that the system was half empty (or half full lol) and they topped it off and did a leak test and saw no visible leaks. They checked the Lexus Canada system and saw that there was past AC work done and feel that they might not have topped it up. they swapped out the service valves in case a leak was coming from there but all should be good now.
3. I had a buzzing/distortion coming from the right door speaker when there was a song with heavier bass playing. they replaced the speaker.
4. For a quick customization feature and a $31 CAD with tax cost, I decided to cancel out my no seat belt chime.
NEXT:
1. Will be doing the resonator delete Saturday and will be putting on the spacers hopefully this weekend as well. I need to find the torque specs for this and do a little more research.
Last edited by BlueRCF10; 05-23-19 at 06:29 PM.
#43
Lexus Test Driver
I put my torque wrench to 80 ft-lbs for the lugs. Same for the spacers.
Just got my car back from the dealership and I got the following done all through warranty:
1. Front and rear brake pads (updated no squeak ones) part numbers: 04465-0W200 and 04466-0W080. Due to minor squeaking.
2. I had AC issues as it wasn't blowing cold. They noticed that the system was half empty (or half full lol) and they topped it off and did a leak test and saw no visible leaks. They checked the Lexus Canada system and saw that there was past AC work done and feel that they might not have topped it up. they swapped out the service valves in case a leak was coming from there but all should be good now.
3. I had a buzzing/distortion coming from the right door speaker when there was a song with heavier bass playing. they replaced the speaker.
4. For a quick customization feature and a $31 CAD with tax cost, I decided to cancel out my no seat belt chime.
NEXT:
1. Will be doing the resonator delete Saturday and will be putting on the spacers hopefully this weekend as well. I need to find the torque specs for this and do a little more research.
1. Front and rear brake pads (updated no squeak ones) part numbers: 04465-0W200 and 04466-0W080. Due to minor squeaking.
2. I had AC issues as it wasn't blowing cold. They noticed that the system was half empty (or half full lol) and they topped it off and did a leak test and saw no visible leaks. They checked the Lexus Canada system and saw that there was past AC work done and feel that they might not have topped it up. they swapped out the service valves in case a leak was coming from there but all should be good now.
3. I had a buzzing/distortion coming from the right door speaker when there was a song with heavier bass playing. they replaced the speaker.
4. For a quick customization feature and a $31 CAD with tax cost, I decided to cancel out my no seat belt chime.
NEXT:
1. Will be doing the resonator delete Saturday and will be putting on the spacers hopefully this weekend as well. I need to find the torque specs for this and do a little more research.
#44
Intermediate
Thread Starter
#45
Intermediate
Thread Starter