Does any company make the front control arm for the rcf yet? other than the T-Demand i got a quote around 1400 for them. Is spc gonna produce some in the near future?

 

No I think is the only company that makes them.... And their stuff is top of the line.... I got a set for sale that I had on my 14 is350 when I had it on air ride

 

Ask FIG? They might be able to fab up a set for less than that..

 

Figs can do it I imagine. he can build just about anything. Check out his Instagram page

 

Megan racing have these for the current IS/GS, I believe the RC-F has the same front end as the GS??

http://www.meganracing.com/product_d...=2206&catid=91

 

Do you have any update on your search?

 

asked Figs and he said not enough interest yet.

 

T- Demand now offers the front upper arms and all the other arms for the RCF, the front uppers are $1200 USD plus shipping. The RCF uppers are different from the base RC and other models. If anyone has any questions or would like to order please send me a PM, thanks Sam

 

what is the quality of these balljoints ? are they replaceable if damaged in the future? these look nice.


what else do you guys offer for the rc-f?

 

I sent them a pm asking the same thing. Maybe get a group buy going for a few goodies from them?

 

Lol still looking. im assuming tdemand is the only company that currently makes them. what are you guys all lowered on anyways

 

All of our arms are designed and manufactured in Japan using the highest quality materials, ball joints and all other parts are replaceable if needed. Here is what we offer for the RC F


Pro Arm:
*Front upper arms, two type available
Onikyan, adjustment range -50mm to 0mm, $1200
Semikyan, adjustment range -40mm to +10mm, $1200

*Front lower arm with tension, Camber side -5 mm to +40 mm, Caster side -15 mm to +30 mm, $1890
*Roll center adjust, 30mm,35mm, 40mm, $180

*Short knuckle, available in 3 types built to your spec, available in 3 colors, T-Demand gold, silver, black
"short" type, shortened in 5mm increments with camber added in a positive direction, $1490
"natural" type, shortened in 5mm increments with no change to camber, $1690
"special" type, shortened in 1mm increments with camber added in a negative direction, $1890

*Rear upper arm set, -30mm to +10mm, $1400
*Rear toe, -30mm to + 10mm, $1000
*Rear tension arm, $550






* Pro Damper, coil over and air suspension is available starting at $1600. These are fully upgradeable from our base version, pictured are the Rc350 model RC F would look similar.



* Brake systems available in two type, Super Slim and Mono block. Our Super Slim BBK has been designed to give maximum clearance from the disk of the wheel in some cases you can run super low disk or low disk where as most traditional BBK must run a high disk to clear the brakes. Prices listed on the pictures.





We also have other parts available, Pro Nut lug nuts, sway bars, etc. Here are some pictures of an RC F one of our Pro Shops in Japan built last year

 

Very nice goodies.
any chance of a big brake kit for the 2016 nx200t awd?
gf just said she wants the RCF brakes on the NX!

 

Yes we have the big brakes available now for the NX and we just released our coilover and air suspension for the NX as well

 

a car the level of the rcf deserves al billet arms.