Figs Superpro LCA bushing
Installed rear lower control arm bushings today and so far it seems to have tightened the car up and eliminated the luxury car neutral on center feel.
First piece of advice.... Take the stock brackets off and bring to a auto machine shop. I had access to a press and the stock bushing metal sleeves just mushroomed. They are also fluid fill and make a mess if you decide to push the rubber out ! Installation was easy with a jack and jack-stands, no force required. I will wait a week to see if an alignment is needed. I fully tightened the nut on the bushing after lowering the car
First piece of advice.... Take the stock brackets off and bring to a auto machine shop. I had access to a press and the stock bushing metal sleeves just mushroomed. They are also fluid fill and make a mess if you decide to push the rubber out ! Installation was easy with a jack and jack-stands, no force required. I will wait a week to see if an alignment is needed. I fully tightened the nut on the bushing after lowering the car
Thread
Thread Starter
Forum
Replies
Last Post
BayAreaLex
GS - 2nd Gen (1998-2005)
4
Sep 25, 2012 04:08 PM
stockhatch
SC - 1st Gen (1992-2000)
14
Dec 17, 2010 01:40 PM



