What Exhaust Are You Running?
The following users liked this post:
beezmarkee (04-19-19)
The following users liked this post:
momak (03-26-20)
#38
#39
Pole Position
I have the same one, the drone is a bit loud only during the break in period then it quiets down. There is a little drone you can hear if you have everything turned off, but if you have music on or something you can’t really hear it at all. It’s totally perfect for daily driving.
#42
I was curious about this as well. Wanted their quad tip for the RC. But wasnt sure about how the tip alignment look
Just came across this one (link):
Looks like an ARK clone with the Helmholtz chambers, and is about as cheap as you can find any axleback. 60mm pipes and clean 4" tips with no rice-flames either. Would like to hear a review from anyone who has it.
Looks like an ARK clone with the Helmholtz chambers, and is about as cheap as you can find any axleback. 60mm pipes and clean 4" tips with no rice-flames either. Would like to hear a review from anyone who has it.
#43
#44
The tips didn't look even in some of the pics I saw when it was installed. I'm ok with the stagger and prefer it.
It looks good alright, but perhaps what you're thinking is that there's too much stagger in the tips? I thought so too, but it looks to be near-identical to the Tanabe, which is working out well for those who've put it on their ISs. Certainly a much lower-cost alternative, although not likely with the same quality sound as the Tanabe. If I had a 17+ this would probably be top of the list, but would be nice to hear it.
#45
Just came across this one (link):
Looks like an ARK clone with the Helmholtz chambers, and is about as cheap as you can find any axleback. 60mm pipes and clean 4" tips with no rice-flames either. Would like to hear a review from anyone who has it.
Looks like an ARK clone with the Helmholtz chambers, and is about as cheap as you can find any axleback. 60mm pipes and clean 4" tips with no rice-flames either. Would like to hear a review from anyone who has it.
Not bad, not amazing.
Anyways, I'm now running PPE Headers with my custom 2.5" pipe with magnaflow cats in line. I have an Ark GRiP on the way. That will be my final exhaust on the car, and itll sound amazing while not being ricey loud.