When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Depending on the jet you use and how you set up the controller, you also have to consider the methanol and distilled water costs. (systems usually run 50% methanol and 50% distilled water. I know some people who run 1 gallon of wiper fluid and 3 cans of heet)
When I first got my snow kit I had it set up wrong and I was going through 1 gallon of methanol and 1 gallon of distilled water every 2 tanks of gas. Now that I have it setup right, it's about every 4 tanks of gas.
If you read faqs on the snow website, you only gain maximum performance from methanol injection if you tune for it.
Originally Posted by Rock-a-Lex
Cool...so you currently have the meth injection setup on your GS? If so, what are your experiences? Is your car tuned for such a mod? (with SAFC or Neo). Thanks...
besides the meth on your car, what other mods DO you have iags400?
Cool...so you currently have the meth injection setup on your GS? If so, what are your experiences? Is your car tuned for such a mod? (with SAFC or Neo). Thanks...
No, I have it on a 1990 Thunderbird SC. It has a front mount IC that is bigger than the radiator and is currently at 16 PSI. Yes, I had hit dyno tuned with and without the methanol. It definitely lowers air inlet temps.