IS intake
Pole Position
Joined: Aug 2006
Posts: 204
Likes: 0
From: FL
In short you can do the following:
Fujitsu (Loud+some hp...its in debate still)
LMS (Loud and horsepower robbing)
K&N (Loud but 11+hp gains claimed)
JoeZ (Not loud but proven 5 hp gains)
Just search for the above intakes and make your own mind up.
Fujitsu (Loud+some hp...its in debate still)
LMS (Loud and horsepower robbing)
K&N (Loud but 11+hp gains claimed)
JoeZ (Not loud but proven 5 hp gains)
Just search for the above intakes and make your own mind up.
The funny thing is if you look at them, they're all designed the same...
Trending Topics
Two questions:
1. I drive 95% hwy, was wondering if you guys see any gas mileage increases?
2. These intakes may be loud when you WOT, how are they when you're just curisin' at 70mph?
1. I drive 95% hwy, was wondering if you guys see any gas mileage increases?
2. These intakes may be loud when you WOT, how are they when you're just curisin' at 70mph?
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
Lexus NX 350h: A Fuel-Sipping Secret Hot Hatch???
Michael S. Palmer
5 Best & 5 Worst Lexus Daily Drivers
Joe Kucinski
Top 5 Hottest Lexus & Toyotas in 2026 (Hardest To Buy)
Brett Foote
2026 Lexus IS 350 F Sport Review: The Last of Its Kind Still Rocks
Michael S. Palmer
Top 10 Most Confusing Things Lexus Has Ever Done!
Joe Kucinski
2026 Lexus ES Review: Lexus Re-Embraces Founding Principles
Michael S. Palmer
10 Lexus Bargains That are Cheaper Than a New Toyota RAV4
Joe Kucinski
8 Weirdest Things Lexus Has Ever Built
Verdad Gallardo
10 Lexus Designs That Have Aged Like Fine Wine
Verdad Gallardo
2) The engine is quiet at 70 mph if on 6th gear; RPM is about 2k at 70 mph on 6th gear. Most intakes will be loud at 3k+ RPM.
Lead Lap
Joined: Aug 2005
Posts: 560
Likes: 2
From: Hawaii
Pole Position
Joined: Aug 2006
Posts: 290
Likes: 0
From: NC
LOL i agree, especially the black GT i raced the other day and i dont see why ppl bring down the LMS intake? 
The LMS intake and Fujita intake are the same, they both have a pipe, both have a filter, and both dont have heat shields. whereas the K&N does.. basically a air intake is a pipe and filter and sometimes a heatsield if its a SRI system. 
i like my setup the best because well its my own. i have a LMS pipe, AEM Synthetic filter (instead of the K&N one it came with), and a custom TLP_IS350 alluminum heat shield. 
but if ur not mechanically savy then get the K&N.
*ahem ok stayin on topic* so why is it that Fujita is better then LMS or K&N. and Joe-z doesnt even count as a intake its just a piece of alluminum pipe. i could bend a piece of pipe and sell it for $100
maybe its because u get a gay bag, gay cap, and watever else u get from buying a fujita. maybe LMS should throw in a diamond ring and they will outperform Fujita haha. 
and i dont see why ppl bring down the LMS intake? The LMS intake and Fujita intake are the same, they both have a pipe, both have a filter, and both dont have heat shields. whereas the K&N does.. basically a air intake is a pipe and filter and sometimes a heatsield if its a SRI system. i like my setup the best because well its my own. i have a LMS pipe, AEM Synthetic filter (instead of the K&N one it came with), and a custom TLP_IS350 alluminum heat shield. but if ur not mechanically savy then get the K&N. *ahem ok stayin on topic* so why is it that Fujita is better then LMS or K&N. and Joe-z doesnt even count as a intake its just a piece of alluminum pipe. i could bend a piece of pipe and sell it for $100 maybe its because u get a gay bag, gay cap, and watever else u get from buying a fujita. maybe LMS should throw in a diamond ring and they will outperform Fujita haha.
