Supercharger Install
Lexus Test Driver
Joined: Mar 2001
Posts: 1,108
Likes: 2
From: California
Originally posted by rominl
man i probably should stop reading this thread, coz' maybe one day i will pull the trigger too, sigh....
hehe henry
you should definately get some F/I kit for the GS!
very very nice info pics there lee!
man i probably should stop reading this thread, coz' maybe one day i will pull the trigger too, sigh....
hehe henry
you should definately get some F/I kit for the GS!
very very nice info pics there lee!
Start up video
OK, here is a quick short little video I put together on the initial start up. Install is about 90% completed. I am waiting for the SRT ECU and then put the front end together once I am satisfied the hoses are all fit. So far no leaks and it appears to be a solid install. Kudos to RMM for quality products.
http://www.tundraworld.com/Lees_SC_GS400.wmv
Right click on link and SAVE to your disk
This video is 15.6 mgs long, so broadband is HIGHLY recommended.
thank you
Lee
http://www.tundraworld.com/Lees_SC_GS400.wmv
Right click on link and SAVE to your disk
This video is 15.6 mgs long, so broadband is HIGHLY recommended.
thank you
Lee
Last edited by Pearlpower; Jun 13, 2004 at 10:39 PM.
Joined: Feb 2001
Posts: 31,944
Likes: 2,737
From: North Carolina
Re: Start up video
Originally posted by Pearlpower
OK, here is a quick short little video I put together on the initial start up. Install is about 90% completed. I am waiting for the SRT ECU and then put the front end together once I am satisfied the hoses are all fit. So far no leaks and it appears to be a solid install. Kudos to RMM for quality products.
http://www.tundraworld.com/Lees_SC_GS400.wmv
Right click on link and SAVE to your disk
This video is 15.6 mgs long, so broadband is HIGHLY recommended.
thank you
Lee
OK, here is a quick short little video I put together on the initial start up. Install is about 90% completed. I am waiting for the SRT ECU and then put the front end together once I am satisfied the hoses are all fit. So far no leaks and it appears to be a solid install. Kudos to RMM for quality products.
http://www.tundraworld.com/Lees_SC_GS400.wmv
Right click on link and SAVE to your disk
This video is 15.6 mgs long, so broadband is HIGHLY recommended.
thank you
Lee
Where did you put the BOV on yours, didn't see it but thought I heard it? On the setup Jeff did (now mine), he located it right up top between the radiator and SC piping.
Very nice pic Dave. Do you have a picture of the top of the BOV? I am interested in how it is installed into the pipe
thank you
Lee
GS400 SC Install
http://www.tundraworld.com/Lees_SC_GS400.wmv
thank you
Lee
GS400 SC Install
http://www.tundraworld.com/Lees_SC_GS400.wmv
Last edited by Pearlpower; Jun 14, 2004 at 12:20 AM.
Joined: Feb 2001
Posts: 31,944
Likes: 2,737
From: North Carolina
Originally posted by Pearlpower
Do you have a picture of the top of the BOV? I am interested in how it is installed into the pipe
Do you have a picture of the top of the BOV? I am interested in how it is installed into the pipe
http://www.somniplex.com/gallery/Inprocess/IMG_3711
http://www.somniplex.com/gallery/Inprocess/IMG_3709
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
Top 10 Most Confusing Things Lexus Has Ever Done!
Joe Kucinski
2026 Lexus ES Review: Lexus Re-Embraces Founding Principles
Michael S. Palmer
10 Lexus Bargains That are Cheaper Than a New Toyota RAV4
Joe Kucinski
8 Weirdest Things Lexus Has Ever Built
Verdad Gallardo
10 Lexus Designs That Have Aged Like Fine Wine
Verdad Gallardo
8 Tips for Improving Your Hybrid or Plug-in Hybrid's Efficiency!
Michael S. Palmer
10 Best Lexus Models No One Remembers
Joe Kucinski
TRD Off-Road Premium: Best 2026 4Runner, Except This One Thing
Michael S. Palmer
Top 10 Lexus & Toyotas to Drive Before You Die!
Joe Kucinski
Awesome. Thank you Dave. BTW, how does mine sound in the video compared to yours, minusing out the BOV?
I was curious of the butterfly sound and higher RPM's as if the air filter is not large enough for the application.
Lee
I was curious of the butterfly sound and higher RPM's as if the air filter is not large enough for the application.
Lee
Last edited by Pearlpower; Jun 14, 2004 at 11:16 AM.
Joined: Feb 2001
Posts: 31,944
Likes: 2,737
From: North Carolina
About the same. Here are a couple of dyno videos (only from my digital camera, not camcorder so you can't really tell).
Hmmmph, I always thought the 'butterfly sound' was from the BOV. Kind of like a pressure cooker releasing steam.
Right click save as:
http://www.somniplex.com/gallery/alb...s/MVI_3683.avi
http://www.somniplex.com/gallery/alb...s/MVI_3684.avi
Hmmmph, I always thought the 'butterfly sound' was from the BOV. Kind of like a pressure cooker releasing steam.
Right click save as:
http://www.somniplex.com/gallery/alb...s/MVI_3683.avi
http://www.somniplex.com/gallery/alb...s/MVI_3684.avi
Last edited by DaveGS4; Jun 14, 2004 at 10:13 AM.
Lexus Fanatic
Joined: May 2001
Posts: 19,103
Likes: 2
From: Netherlands
Originally posted by Pearlpower
Very nice pic Dave. Do you have a picture of the top of the BOV? I am interested in how it is installed into the pipe
thank you
Lee
GS400 SC Install
http://www.tundraworld.com/Lees_SC_GS400.wmv
Very nice pic Dave. Do you have a picture of the top of the BOV? I am interested in how it is installed into the pipe
thank you
Lee
GS400 SC Install
http://www.tundraworld.com/Lees_SC_GS400.wmv
Can't wait to see more of the beast.
Lexus Fanatic
Joined: Dec 2003
Posts: 14,523
Likes: 3
From: new jersey
Originally posted by DaveGS4
About the same. Here are a couple of dyno videos (only from my digital camera, not camcorder so you can't really tell).
Hmmmph, I always thought the 'butterfly sound' was from the BOV. Kind of like a pressure cooker releasing steam.
Right click save as:
http://www.somniplex.com/gallery/alb...s/MVI_3683.avi
http://www.somniplex.com/gallery/alb...s/MVI_3684.avi
About the same. Here are a couple of dyno videos (only from my digital camera, not camcorder so you can't really tell).
Hmmmph, I always thought the 'butterfly sound' was from the BOV. Kind of like a pressure cooker releasing steam.
Right click save as:
http://www.somniplex.com/gallery/alb...s/MVI_3683.avi
http://www.somniplex.com/gallery/alb...s/MVI_3684.avi
is that the slound of the blow-off valve
Lexus Fanatic
Joined: Dec 2003
Posts: 14,523
Likes: 3
From: new jersey
Originally posted by Pearlpower
What I have left to do:
Install Apexi SFC-II unit-. Have no idea. Have factory manuals for reference.
Should be done within the next day or so. Dyno tuning will follow this week as well. Wish me luck.
Lee
What I have left to do:
Install Apexi SFC-II unit-. Have no idea. Have factory manuals for reference.
Should be done within the next day or so. Dyno tuning will follow this week as well. Wish me luck.
Lee
if so any instal pics ?
I decided to forgo the SAFC setup and get the SRT ecu. That did not work and Mo talked me into a Greddy Emanage computer. I have been waiting patiently now on my 4th week for delivery. Will be able to update once I get it installed.
Lee
Lee
Pole Position
Joined: Aug 2004
Posts: 243
Likes: 0
From: Nevada
The "butterefly" sound you guys are hearing is compressor surge.Either there is no BOV installed or if there IS one installed it needs to be coming open more to get rid of the excess air.Cause when the throttle body is closed that air needs to go SOMEWHERE.
Most blower cars I have ever built had adjustable BOVs so we could "tune" it.I always set them up to blow off under vaccuum and then close under boost.That way the compressed air has somewhere to go.
It might seem weird but when the car was idleing I set the blow off to open and bleed off SOME of the pressure, then as soon as I hit gas it closes and has BOOST.
Most blower cars I have ever built had adjustable BOVs so we could "tune" it.I always set them up to blow off under vaccuum and then close under boost.That way the compressed air has somewhere to go.
It might seem weird but when the car was idleing I set the blow off to open and bleed off SOME of the pressure, then as soon as I hit gas it closes and has BOOST.
