custom turbo setup question
10-21-03, 07:15 PM
#1
Rookie
Thread Starter
Join Date: May 2003
Location: Texas
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
custom turbo setup question
my friends and i are trying to build a turboed CRX 1988. so far we know we need turbo manifold for exhaust, a t3 turbo w/ waste gate, FMIC, intake manifold, BOV, and turbo timer. we are just trying to setup for 8PSI because he has a lot of miles. what else would we need?
THanks,
PS(i only posted this topic here on sc400 tech fourm because everyone does NA-T on sc300s, so you all are probably the smartest
)
THanks,
PS(i only posted this topic here on sc400 tech fourm because everyone does NA-T on sc300s, so you all are probably the smartest
)
Last edited by DontHateSc; 10-21-03 at 07:18 PM.
10-21-03, 09:00 PM
#3
Bluegr*** Performance
Join Date: Feb 2002
Location: North Kentuckarolinay
Posts: 1,532
Likes: 0
Received 0 Likes
on
0 Posts
And a really big wing? 
At least an auxillary injector and fmu. I'd get a high pressure fuel pump and a fire extinguisher. Is that the zc? Just be sure you get the fuel you need and make sure the lines are in good shape so you won't have to use that extinguisher.
At least an auxillary injector and fmu. I'd get a high pressure fuel pump and a fire extinguisher. Is that the zc? Just be sure you get the fuel you need and make sure the lines are in good shape so you won't have to use that extinguisher.
10-22-03, 12:12 PM
#5
Lead Lap
Join Date: Jun 2002
Location: Texas
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
For the honda guys. I've seen great results If they go with the Hondata set up. This is your engine mangament. For more info go to www.Hondata.com or there is a huge board a freind of mine is apart. www.honda-tech.com.
Most imoprtant is Fuel managment with hondas. It also depends on what motor it is. B-series or D-series.
Send your friend to www.Honda-tech.com contact "hybridcivicLs-T" S.N. Hes on the board and his set up is awesome. He's running 11psi on a stock integra block and almost making 290whp/230ftlbs.
It's a 12 sec civic. They know there stuff about hondas on that board.
Most imoprtant is Fuel managment with hondas. It also depends on what motor it is. B-series or D-series.
Send your friend to www.Honda-tech.com contact "hybridcivicLs-T" S.N. Hes on the board and his set up is awesome. He's running 11psi on a stock integra block and almost making 290whp/230ftlbs.
It's a 12 sec civic. They know there stuff about hondas on that board.
Thread
Thread Starter
Forum
Replies
Last Post
nuturf87
Performance & Maintenance
4
11-22-12 07:21 AM