exhaust drone, rumble.
#1
Driver
Thread Starter
iTrader: (6)
Join Date: Mar 2012
Location: ca
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
exhaust drone, rumble.
watup yall, i just installed my new exhaust yesterday and boy i hate the drone its putting out... its a 3inch -5inch -dual 3inch to a magnaflow.. could the 5inch piece (5 foot of piping) be causing the drone?? any ideas? its on a 1jzgte sc300 stock down pipe. the gloves are marking the 5 inch piece. if i replace the 5inch with a 3 inch fix the rumble/drone. FYI: i bought the exhaust like this. previous owner setup was for over 1000 hp . supposedly the exhaust was flow tested and everything.
#2
Lexus Test Driver
iTrader: (1)
Join Date: Dec 2008
Location: fl
Posts: 1,540
Likes: 0
Received 0 Likes
on
0 Posts
At the end of the day its a 3inch exhaust cause the exhaust leaves the turbo in a 3 inch.
My suggestion would be to put in a resonator and the 5" would definitely cause some drowning.
My personal car in Sig has a true 4" from front to back and I had significant droning, I installed a 4" resonator and it put the drown more into a deep hum.
Hope this helps.
My suggestion would be to put in a resonator and the 5" would definitely cause some drowning.
My personal car in Sig has a true 4" from front to back and I had significant droning, I installed a 4" resonator and it put the drown more into a deep hum.
Hope this helps.
#3
Driver
Thread Starter
iTrader: (6)
Join Date: Mar 2012
Location: ca
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
At the end of the day its a 3inch exhaust cause the exhaust leaves the turbo in a 3 inch.
My suggestion would be to put in a resonator and the 5" would definitely cause some drowning.
My personal car in Sig has a true 4" from front to back and I had significant droning, I installed a 4" resonator and it put the drown more into a deep hum.
Hope this helps.
My suggestion would be to put in a resonator and the 5" would definitely cause some drowning.
My personal car in Sig has a true 4" from front to back and I had significant droning, I installed a 4" resonator and it put the drown more into a deep hum.
Hope this helps.
#5
Driver
Thread Starter
iTrader: (6)
Join Date: Mar 2012
Location: ca
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
I'm thinking about swapping my flow masters for a dual gte exhAust here a picture. It's off a 2012 mustang gt. (Let's not even get into why a different car exhAust topic lol) looks good, the tips are rolled chrome and they are long so it will give me the look I was looking efor to begin with. But will it lower that rumble. I believe it will a little bit.
#7
Driver
Thread Starter
iTrader: (6)
Join Date: Mar 2012
Location: ca
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
thanks for all the help and yes i will be adding that resonator also.
thanks
Trending Topics
#8
Driver
Thread Starter
iTrader: (6)
Join Date: Mar 2012
Location: ca
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
A little update on my car.. i sold the magnaflows and bought the 2011 mustang GT exhaust . and it sounds like high flow stock exhaust. i will do a sound clip and when i get a chance today. pics here are some pics..
it was a good fit. cost me 100 to get them adapted. which wasn't too bad.
PS: iam so happy with the sound.. its not loud at all. almost like stock...
it was a good fit. cost me 100 to get them adapted. which wasn't too bad.
PS: iam so happy with the sound.. its not loud at all. almost like stock...
Thread
Thread Starter
Forum
Replies
Last Post