92 engine harness for SC3 in a 95 SC3 will it work?
#1
92 engine harness for SC3 in a 95 SC3 will it work?
ok guys like stated above will it work ? i took the intake and everything apart the other day to get to the injectors and in the process i broke the tps sensor clip and all 6 injector clips also another clip on the side of the intake i would like to know if the engine harness from a 92 2JZ-GE will fit my 95 2JZ-GE?? because i found a guy selling one on ebay for $60 which is by far the cheapest I've found. .. also i was thinking that if the harness wasn't direct plug and play , i was going to just salvage the clips that i need from the 92 harness. i would of course take my time and solder everything together and heat shrink everything in east to get to places just in case anything were to happen so i would also like opinions on that. i already know some of you are not gunna like the idea but ill take any feedback. thanks a lot guys
#5
Instructor
iTrader: (8)
there is a difference in the harnesses, you will have swap a wire or two on the body plugs, because there is a difference in the starter wiring. also the 95 cars have the alternator wiring in the body harness whereas the 92-94 is in the engine harness.
i think its going to be more trouble than you want to get into, if I were you I would just replace the clips on your original harness. each clip has a 5 or 6 digit number on it, you should be able to get them from Toyota or Lexus just give them the number
i think its going to be more trouble than you want to get into, if I were you I would just replace the clips on your original harness. each clip has a 5 or 6 digit number on it, you should be able to get them from Toyota or Lexus just give them the number
Last edited by 93MSB; 04-21-12 at 09:20 AM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post