Attn. Guys with LS Swap: Need a favor
#1
Driver School Candidate
Thread Starter
Join Date: Jan 2005
Location: F22 Secret Lair (aka) The "Austin Millbarge"
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Attn. Guys with LS Swap: Need a favor
Happy New Year
I want to start work on modelling my up/forward turbo headers in Solidworks and need a couple of quick measurements to define the space constraints.
I can't remember whose car this is but I hope they don't mind me using their pic, as I've saved quite a few for reference sake.
I'm looking for measurements between both the heads and shock towers, rear of driver side head to brake booster, and front of the heads to the radiator.
Thanks so much fellas.
I want to start work on modelling my up/forward turbo headers in Solidworks and need a couple of quick measurements to define the space constraints.
I can't remember whose car this is but I hope they don't mind me using their pic, as I've saved quite a few for reference sake.
I'm looking for measurements between both the heads and shock towers, rear of driver side head to brake booster, and front of the heads to the radiator.
Thanks so much fellas.
Last edited by atlsupdawg; 01-05-12 at 08:20 AM.
#2
Driver School Candidate
iTrader: (2)
Join Date: Jan 2010
Location: FL
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Here is a pic of my setup, i know it doesn't help you with measurements but it gives you an idea how room there is. I still have room for the AC compressor too.
This is my first turbo setup, it has turned out to work very well but I will eventually redo the hot side in stainless and have it ceramic coated. A lot of cleanup work remains - I need to delete ABS - its just fugly!
This is my first turbo setup, it has turned out to work very well but I will eventually redo the hot side in stainless and have it ceramic coated. A lot of cleanup work remains - I need to delete ABS - its just fugly!
Thread
Thread Starter
Forum
Replies
Last Post