heater core hoses
#1
Lead Lap
Thread Starter
Join Date: Oct 2006
Location: Madison WI
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
heater core hoses
Could anyone post a diagram, take pictures, or post a description of the heating core hoses. We're not sure which ones go where, which way it flows.
It's a 94 400 with 1jzgte swapped in. This is hopefully one of the final issues we'll have!
TIA
It's a 94 400 with 1jzgte swapped in. This is hopefully one of the final issues we'll have!
TIA
#2
Lead Lap
iTrader: (3)
Join Date: May 2008
Location: Misawa,Japan or Deployed
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
I have this same question. I am going through the SC300 FSM and see where the block hose goes to and route that way.
EDIT: I looked at the removal of the engine block step by step and they don't even mention the heater hoses. Er...So honestly at a loss there.
BTW I went to Advance and bought a J-shaped 3/4" hose that had a 180 bend in it after the bend it is about 3.5 feet long.
EDIT: I looked at the removal of the engine block step by step and they don't even mention the heater hoses. Er...So honestly at a loss there.
BTW I went to Advance and bought a J-shaped 3/4" hose that had a 180 bend in it after the bend it is about 3.5 feet long.
Last edited by GSXRMack; 07-09-09 at 06:24 PM. Reason: Finished reading the block removal.
Thread
Thread Starter
Forum
Replies
Last Post
jlamonica
Performance & Maintenance
17
01-19-19 05:49 AM
97-SC300
Performance & Maintenance
9
11-09-11 01:09 PM