95 sc300 2jzge vvti swap
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2014
Location: califorina
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
95 sc300 2jzge vvti swap
i have a 95 sc300 and i just picked up a 2jzge vvti gs300 motor with ecu end engine harness wondering if anyone could give me some info on doing this swap as far as wiring or is it a direct swap if i have the 98 sc300 2jz vvti engine harness
Last edited by crichsc300; 03-26-14 at 07:02 PM.
#2
Lexus Test Driver
iTrader: (4)
Do you have the key that came with that ecu? If not you're gonna have to spend a few hundred bucks on getting a key programmed. Then after that you'll have to acquire and wire a transponder amplifier to pick up the keys signal so the car will start. Be a boss and run it on a jzx100 ecu and maf with 440s with an early model sc throttle body. That way you can slap a turbo on later and you're ready to go tuned for boost from the factory. Don't get retarded with the vvti ge engines and boost or it'll blow up. Have fun.
#3
Driver School Candidate
Thread Starter
Join Date: Mar 2014
Location: califorina
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Do you have the key that came with that ecu? If not you're gonna have to spend a few hundred bucks on getting a key programmed. Then after that you'll have to acquire and wire a transponder amplifier to pick up the keys signal so the car will start. Be a boss and run it on a jzx100 ecu and maf with 440s with an early model sc throttle body. That way you can slap a turbo on later and you're ready to go tuned for boost from the factory. Don't get retarded with the vvti ge engines and boost or it'll blow up. Have fun.
Thread
Thread Starter
Forum
Replies
Last Post
WadeLovell
Performance & Maintenance
7
05-21-12 10:21 AM
thombiz
Performance & Maintenance
3
12-17-04 03:21 PM