When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I belive earlier in the thread it was explained that there is no jumper harness to make a stand-alone hook up to the JZZ30 harness. You need to do a bit of custom wiring, or find a piggy back specifically for the JZZ30.
thats great news! Im in the UK. Where could i get one of these patch harnesses or how could i get it to hook-up with the 1jz jzz30 loom?
thanks in advance
Originally Posted by Teflon Don
anybody know how to go about this?
Originally Posted by Mrpickles
I belive earlier in the thread it was explained that there is no jumper harness to make a stand-alone hook up to the JZZ30 harness. You need to do a bit of custom wiring, or find a piggy back specifically for the JZZ30.
dr tweak can build you a harness but it will cost you a pretty penny....
on my 1.5jz setup i have a sard ecu with emanage ult, greddy has a plug and play harness but hurry up as they are going out of business
nah afaik its only around 500 ish when you take 2 different harnesses and put them together ie a rb25 into a 240. then you would have to convert the harnesses to work with each other.
patch harnesses are still up there but really not to bad.
i had a Fcon-V on my 1jz and for me tuning it was trying to find some one that can tune a fcon near me. basically if you can find some one that can tune it go for it! you can get them relatively cheap if your lucky.